Abstract:A superstructure-based method is applied to optimize the design of supercritical carbon dioxide cycle for concentrated solar power systems. A superstructure is designed for the cycle featuring various options in cold-end and hot-end configurations. Process integration and cycle variables are simultaneously optimized for the superstructure based on the integrated thermoeconomic model of the overall system. Optimizations are performed for eight cases with different designs of maximum and minimum temperatures. Sensitivity analyses are conducted on the design parameters and related capital costs of subsystems of the overall system. 1.5-13.5% reduction in levelized cost of electricity is obtained through the superstructure-based optimization relative to the corresponding base cases. The cost of thermal storage system at optimal condition is significantly surged by 36.3-111.6% when the maximum temperature surpasses 600 degrees C, which consequently leads to the variation in configuration for the optimal cycle. The minimum levelized cost of electricity is obtained at 600 degrees C with a reduction of up to 4.1% compared to that at 550 degrees C. The further increase in the maximum temperature beyond 600 degrees C will be followed by 8.6%-0.2% rise in the levelized cost of electricity. The improvements in maximum pressure and turbomachinery performance can lead to significant reduction in levelized cost of electricity, especially at high maximum and minimum temperatures. However, these improvements have relatively uneventful effects on the configuration of the optimal cycle. The capital cost of thermal storage system has significant effects on the design of the optimal cycle configuration whereas the variation in the capital cost of cycle system has less eventful effects. The effect of capital cost of cycle system is more dominant than that of the thermal storage system at 550 degrees C and 600 degrees C maximum temperatures in terms of levelized cost of electricity, while this situation is reversed as maximum temperature rises higher due to the soaring capital cost of the thermal storage system. The configuration with main compression intercooling or partial cooling design in the cold end and single-turbine design in the hot end is finally suggested for the supercritical carbon dioxide cycle applied in state-of-the-art and next-generation concentrated solar power systems.

Thermo-Economic Optimization Of Supercritical Co2 Brayton Cycle On The Design Point For Application In Solar Power Tower System

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Design Optimization and Operating Performance of S-CO 2 Brayton Cycle under Fluctuating Ambient Temperature and Diverse Power Demand Scenarios

Optimal Integration of Recompression Supercritical CO2 Brayton Cycle with Main Compression Intercooling in Solar Power Tower System Based on Exergoeconomic Approach

Thermodynamic analysis of supercritical Brayton cycles using CO2-based binary mixtures for solar power tower system application

Off-design optimization for solar power plant coupling with a recompression supercritical CO2 Brayton cycle and a turbine-driven main compressor

Thermodynamic Analysis and Comparison for Different Direct-Heated Supercritical CO2 Brayton Cycles Integrated into a Solar Thermal Power Tower System

Parametrized Analysis and Multi-Objective Optimization of Supercritical CO2 (S-CO2) Power Cycles Coupled with Parabolic Trough Collectors

Design Optimization and Off-Design Performance Analysis of One-Dimensional Supercritical CO2 Brayton Cycle

Part-load Performance Analysis and Comparison of Supercritical CO2 Brayton Cycles

Off-design performance of a supercritical CO<sub>2</sub> Brayton cycle integrated with a solar power tower system

Performance Comparison of SPT Systems Integrated with Various Supercritical CO2-based Mixture Brayton Cycles Based on Multi-Objective Optimization

Novel Design Optimization of Concentrated Solar Power Plant with S-CO2 Brayton Cycle Based on Annual Off-Design Performance

Influence of Supercritical Carbon Dioxide Brayton Cycle Parameters on Intelligent Circulation System and Its Optimization Strategy

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Design and performance analysis of compressed CO2 energy storage of a solar power tower generation system based on the S-CO2 Brayton cycle

Analysis on thermodynamic and economic performances of supercritical carbon dioxide Brayton cycle with the dynamic component models and constraint conditions

A Review on Integrated Design and Off-Design Operation of Solar Power Tower System with S–CO2 Brayton Cycle

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis

Superstructure Design and Optimization on Supercritical Carbon Dioxide Cycle for Application in Concentrated Solar Power Plant

Multi-objective Optimization of Combined Cooling, Heating, and Power Systems with Supercritical CO2 Recompression Brayton Cycle