CO2-based mixture working fluids used for the dry-cooling supercritical Brayton cycle: Thermodynamic evaluation
Xinxin Liu,Zhen Xu,Yingchun Xie,Haiyang Yang
DOI: https://doi.org/10.1016/j.applthermaleng.2019.114226
IF: 6.4
2019-11-01
Applied Thermal Engineering
Abstract:<p>Supercritical carbon dioxide Brayton cycle, distinguished by high thermal efficiency and compact structure, has great potential for application in solar thermal power generation systems. However, it faces the problem that the cycle thermal efficiency reduces with increasing ambient temperature in hot and water-deficient areas, where dry cooling is a necessary choice for power generation systems. In this paper, five CO<sub>2</sub>-based mixture working fluids, including CO<sub>2</sub>-cyclohexane, CO<sub>2</sub>-butane, CO<sub>2</sub>-isobutane, CO<sub>2</sub>-propane and CO<sub>2</sub>-H<sub>2</sub>S, are investigated in a 50 MW recompression Brayton cycles. Their impact on the cycle performance under typical operating conditions, such as main compressor inlet temperature, split ratio, turbine inlet temperature and maximum cycle pressure, are evaluated by energy and exergy analysis. The heat transfer and pressure drop in the recuperator are also discussed. The results show that the Brayton cycles using mixture working fluids have obvious performance advantages compared with sCO<sub>2</sub> Brayton cycle under higher ambient temperature. According to the thermodynamic performance of working fluids in the cycle, CO<sub>2</sub>-H<sub>2</sub>S is the best choice. However, the CO<sub>2</sub>-propane has the highest heat transfer coefficient and relatively low pressure loss in the recuperator. This research can be used as a guide to the selection of mixture working fluids for dry-cooling supercritical Brayton cycle.</p>
energy & fuels,engineering, mechanical,thermodynamics,mechanics