Abstract:The demand for reconfigurable devices for emerging RF and microwave applications has been growing in recent years, with additive manufacturing and photonic thermal treatment presenting new possibilities to supplement conventional fabrication processes to meet this demand. In this paper, we present the realization and analysis of barium–strontium–titanate-(Ba0.5Sr0.5TiO3)-based ferroelectric variable capacitors (varactors), which are additively deposited on top of conventionally fabricated interdigitated capacitors and enhanced by photonic thermal processing. The ferroelectric solution with suspended BST nanoparticles is deposited on the device using an ambient spray pyrolysis method and is sintered at low temperatures using photonic thermal processing by leveraging the high surface-to-volume ratio of the BST nanoparticles. The deposited film is qualitatively characterized using SEM imaging and XRD measurements, while the varactor devices are quantitatively characterized by using high-frequency RF measurements from 300 MHz to 10 GHz under an applied DC bias voltage ranging from 0 V to 50 V. We observe a maximum tunability of 60.6% at 1 GHz under an applied electric field of 25 kV/mm (25 V/μm). These results show promise for the implementation of photonic thermal processing and additive manufacturing as a means to integrate reconfigurable ferroelectric varactors in flexible electronics or tightly packaged on-chip applications, where a limited thermal budget hinders the conventional thermal processing.

The Rf/Microwave Performance Of The Planar Interdigitated Varactors Based On Ba0.6sr0.4tio3/Ba0.4sr0.6tio3 Double-Layer Thin Film

Microwave Performance Dependence of BST Thin Film Planar Interdigitated Varactors on Different Substrates

The Effect of Physical Design Parameters on the RF and Microwave Performance of the BST Thin Film Planar Interdigitated Varactors

A Novel Structure for Dc Bias on Varactors in Composite Right/Left-Handed Transmission Lines Phase Shifter Using Ba0.25sr0.75tio3 Thin Film

A Wideband Voltage-Controlled Oscillator with Gain Linearized Varactor Bank

Microwave characteristics analysis of coplanar electrodes in III-V semiconductors traveling-wave modulators

Performance and Characterization of Additively Manufactured BST Varactor Enhanced by Photonic Thermal Processing

THz Thin Film Varactor Based on Integrated Ferroelectric HfZrO2

A GaN-based metal-semiconductor-metal planar inter-digitated varactor

Robust Tunability and Newly Emerged Q Resonance of Ba 0.8 Sr 0.2 TiO 3 -Based Microwave Capacitors under Gamma Irradiations

In-plane Dielectric Properties of Epitaxial 0.65pb(mg1∕3nb2∕3)o3−0.35pbtio3 Thin Films in a Very Wide Frequency Range

Barium Strontium Titanate Thin Film Varactors for Room-Temperature Microwave Device Applications

High Tunable Ba<SUB Align="right">0.5sr<sub Align="right">0.5tio<sub Align="right">3 Thin Film Deposited on Silicon Substrate with MgO Buffer Layer

Analysis and optimization of a side pull-down electrodes controlled MEMS varactor

Epitaxial Growth Of Dielectric Ba0.6sr0.4tio3 Thin Film On Mgo For Room Temperature Microwave Phase Shifters

High Performance Gigahertz Flexible Radio Frequency Transistors with Extreme Bending Conditions

Cooperative Thermal-Electric Field Control of Infrared Modulation Using a Vanadium Dioxide Film-Based Modulator

Dielectric properties of Ba0.6Sr0.4TiO3-La(B0.5Ti0.5)O3 (B=Mg, Zn) ceramics

Ferroelectric BaTiO3/SrTiO3 Multilayered Thin Films for Room-Temperature Tunable Microwave Elements.

Microwave and Infrared Dielectric Response of Tunable Ba1−xSrxTiO3 Ceramics

Robust Tunability and Newly Emerged Q Resonance of Ba0.8Sr0.2TiO3-Based Microwave Capacitors under Gamma Irradiations