Abstract:The LAMOST telescope has been operating steadily for more than 10 yr and is currently undergoing an upgrade to its fiber-optic positioning system on the telescope's focal plane. By adding a vision detection system to accurately measure the current position of the optical fibres and carry out closed-loop feedback control, the positioning accuracy of the original optical fiber system is greatly improved. Due to the limitation of the existing optical path of the telescope, to avoid blocking the optical path, the detection system camera cannot be placed on the optical axis of the telescope, which makes the camera and the optical fiber end face at a relatively inclined position. However, the angle between the camera and an object will introduce errors to the polynomial calibration method used in the visual detection system. To address this problem, by analyzing the relationship between the camera imaging principle and the polynomial calibration method, this paper studies the influence of distortion and imaging angle on polynomial calibration results under different angle conditions and proposes an improved high-precision polynomial calibration method. First, the distortion parameters are calculated using Zhang's method, and the image distortion is removed. Then, a mapping model between oblique plane image and nonoblique plane image is established through a homography matrix. The coordinates of all oblique plane feature points are mapped one by one to the nonoblique plane positions on the image space, and a good correction effect is obtained. Finally, the calibration images from different angles are calculated and analyzed through simulation experiments and compared with Zhang's method. The results show that this method has a 10%–40% improvement over Zhang's method.

Accurate Piston Error Detection Unaffected by Tip-Tilt Error

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

HIGH-PRECISION ASTROMETRY WITH A DIFFRACTIVE PUPIL TELESCOPE

Optimization of Transverse Translation Diverse Phase Retrieval for Optical Elements with Mid-Spatial Frequency Errors

Error Analysis Of Spherical Ultra-Precision Measurement

Tip-tilt Error Detection for Segments Based on CNN

High-Precision Attitude Angle Measuring System Based on Talbot Interferometry

Analytical target-agnostic piston sensing for segmented telescopes using sparse redundant baseline pairs

Mach-Zehnder interferometer for piston and tip-tilt sensing in segmented telescopes: theory and analytical treatment

Multi-spectral piston sensor for co-phasing giant segmented mirrors and multi-aperture interferometric arrays

Optical Design and accuracy analysis of interferometric star tracker

Error impact analysis and experimental research for absolute testing of spherical surfaces

Co-phase quantization and adjustment of segmented mirrors based on dual-wavelength vortex interference

Piston error correction of sparse aperture systems using the metaheuristic stochastic parallel gradient descent algorithm

Large Range of a High-Precision, Independent, Sub-Mirror Three-Dimensional Co-Phase Error Sensing and Correction Method via a Mask and Population Algorithm

Micro-pixel accuracy centroid displacement estimation and detector calibration

Research on co-phasing detection of segmented mirror based on convolutioned neural networks

Research on Calibration Method of off-axis Closed-loop Detection System for Multi-target Spectral Telescope

The Edge Sensor of Segmented Mirror Based on Fringes of Equal Thickness

Telescope interferometers: an alternative to classical wavefront sensors

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry