Abstract:Astronomical observation requires more distant and fainter object with a better resolution, so that the larger primary mirror telescope is needed to ensure the better resolution and light energy collection. However, the diameter of monolithic primary mirror is limited due to the manufacturing and logistics limitations. The segmented primary mirror is taken as an alternative solution to break the limitation. The segmented primary mirror must be co-phased to accomplish a diffraction-limited imaging. In this paper, we put forward a new method to measure the tip/tilt errors between the segments in whole aperture simultaneously based on analyzing the intensity distribution and Fourier optics principle. We set a mask with sparse multi-sub-pupils configuration on the segments' conjugate plane. A point source is taken as the object of the segmented telescope, the pattern focused on the CCD is recorded as the point spread function (PSF). Then, the Fourier transform is performed for the PSF and we can obtain the optical transfer function (OTF) which is composed of the modulation and phase transfer functions (MTF and PTF). Tip/tilt errors can be extracted from the PTF side-lobes. Simulation and preliminary experiments have been done to validate the feasibility of the method. The accuracy of the method is 6.344 x 10(-6) lambda(lambda=632.8nm) RMS when the tip/tilt error is less than 0.4 lambda, and when the tip/tilt error is in the range of [0.4 lambda,2.4 lambda], the accuracy is 8.55x10(-15) lambda RMS. We also analyze the disturbance factor of the method in the simulation, including the piston error, the noise of the signal processing system, the surface shape error of the segments, etc. Furthermore, a preliminary experiment is built up to verify the 3 segmented system. This method has a higher detection efficiency and a lower hardware requirement which only needs a mask with sparse sub-aperture configuration.

Analytical target-agnostic piston sensing for segmented telescopes using sparse redundant baseline pairs

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Accurate Piston Error Detection Unaffected by Tip-Tilt Error

Model-driven extended scene piston sensing for synthetic aperture telescopes

High-accuracy Piston Error Measurement with a Large Capture Range Based on Coherent Diffraction

Piston error correction of sparse aperture systems using the metaheuristic stochastic parallel gradient descent algorithm

HIGH-PRECISION ASTROMETRY WITH A DIFFRACTIVE PUPIL TELESCOPE

Multi-spectral piston sensor for co-phasing giant segmented mirrors and multi-aperture interferometric arrays

MTF Non-Redundant Distribution for Multi-Piston Errors Detection of Segmented Telescopes

Piston sensing for sparse aperture systems via all-optical diffractive neural network

Non-Redundant Mtf Distribution Method for Sensing Multi-Piston Simultaneously in Segmented Telescopes

Multi-tip/tilt errors simultaneous detection for segmented telescopes based on coherent diffraction

Research on Calibration Method of off-axis Closed-loop Detection System for Multi-target Spectral Telescope

Polarization Properties of Receiving Telescopes in Atmospheric Remote Sensing Polarization Lidars.

Mach-Zehnder interferometer for piston and tip-tilt sensing in segmented telescopes: theory and analytical treatment

Application of A High-Precision Interferometric Measuring System As Phasing the Segmented Primary Mirrors of the Next Generation of Ground-Based Telescope

All-purpose automatic image stacking for sparse aperture telescopes using dynamic metric stochastic parallel gradient descent algorithm

Accuracy analysis of pseudo lateral shearing interferometry measuring complex spatio-temporal couplings

Analysis of Error Sources in STEP Astrometrytwo

Research on fine co-focus adjustment method for segmented solar telescope

Prototype System for Unmanned Reference Point Determination at the Sub‐Millimeter Level