Abstract:Ti-6Al-4V alloys mad by additive manufacturing (AM) with slower cooling rate (e. g., direct energy deposition (DED)) generally have the problem of severe coarsening of alpha phase. This study presents a method to refine the microstructure of the primary 13 phase formed during the solid-liquid transformation, microstructures formed during the 13 -+ alpha + 13 transformation, and recrystallized microstructures formed during the repeated heating cycles encountered in AM processes. This is accomplished by the in situ precipitation of nano-sized dispersed high-melting-point yttria Y2O3 particles. The addition of micron-sized particles with high melting points can refine primary crystallized grains and transformed grains corresponding to the secondary phase in Ti-6Al-4V alloys. In addition, they can effectively inhibit the recrystallization and growth of prior-deposited metal grains. The microstructural and tensile properties of laser additive manufactured with filler wire Ti-6Al-4V components with different amounts of Y2O3 (0, 0.12, and 0.22 wt%) were investigated. The refining effect of Y2O3 was significant and the tensile strength of Ti-6Al-4V containing 0.22 wt% Y2O3 in the longitudinal and transverse directions was greater than that of Ti-6Al-4V by approximately 12% and 9%, respectively. Concurrently, there was no loss in the elongation of the material in either direction. The strategy of using micron-sized refractory particles to control phase transformation (primary crystallization, solid-state phase transformation, and recrystallization) can be applied to the AM of different metals, in which microstructures are susceptible to coarsening.

The significant impact of grain refiner on -TiAl intermetallic fabricated by laser-based additive manufacturing

The significant impact of grain refiner on γ-TiAl intermetallic fabricated by laser-based additive manufacturing

From Crack-Prone to Crack-Free: Unravelling the Roles of LaB6 in a Β-Solidifying TiAl Alloy Fabricated with Laser Additive Manufacturing

Hierarchical Grain Refinement During the Laser Additive Manufacturing of Ti-6Al-4V Alloys by the Addition of Micron-Sized Refractory Particles

A Novel Method to 3D-Print Fine-Grained AlSi10Mg Alloy with Isotropic Properties Via Inoculation with LaB6 Nanoparticles

Uncovering the Roles of LaB 6-Nanoparticle Inoculant in the AlSi10Mg Alloy Fabricated Via Selective Laser Melting

Enhancing Hardness and Wear Performance of Laser Additive Manufactured Ti6Al4V Alloy Through Achieving Ultrafine Microstructure

Effects of Processing Parameters on a Β-Solidifying TiAl Alloy Fabricated by Laser-Based Additive Manufacturing

Achieving grain refinement and ultrahigh yield strength in laser aided additive manufacturing of Ti−6Al−4V alloy by trace Ni addition

Fe nanoparticles modified pure Ti alloy on microstructure evolution and fine crystallization mechanism fabricated by additive manufacturing

Mechanism of grain refinement and mechanical property enhancement of Ti-45Al-8Nb alloy by directed laser deposition

Microstructures and Mechanical Behaviors of a Directional Lamellar Ti-48Al-2Cr-2Nb Alloy Produced by Laser Additive Manufacturing

Solidification Behavior and Grain Morphology of Laser Additive Manufacturing Titanium Alloys

Microstructure and Mechanical Properties of Laser Metal Deposited Ti6Al4V Alloy with Near Equiaxed Β Grain Structure

Optimization of Processing Parameters and Microstructure Evolution of (TiB+La 2 O 3 )/Ti6Al4V Manufactured by Laser Melting Deposition

Effects of TiC Nanoparticle Inoculation on the Hot-Tearing Cracks and Grain Refinement of Additively-Manufactured AA2024 Al Alloys

Microstructure characteristics of a γ single-phase Ti-55Al-7.5Nb alloy fabricated via additive manufacturing

Fabrication of Ti3Al-Based Intermetallic Alloy by Laser Powder Bed Fusion Using a Powder Mixture

Effect of Al–5Ti–1B grain refiner on microstructure and properties of arc-additive-manufactured Al–Mg alloy

The effect of hydrogen on the grain refinement and mechanisms for Ti6Al4V alloys during laser melting deposition

Grain refinement and columnar-to-equiaxed transition of Ti6Al4V during additive manufacturing via different laser oscillations