Abstract:Highlights • Crack-free Ti/Ce co-modified 2195 alloys are manufactured by LPBF. • The grains of composites transform from coarse columnar to fine equiaxed grains. • The crack suppression and strengthening mechanisms of composites are revealed. • The bracket component with lattice structure filling is designed and manufactured. High cracking susceptibility of Al-Li alloys with Ti/CeB 6 addition is thoroughly suppressed in laser powder bed fusion (LPBF) processing of Ti/Ce co-modified 2195 alloys at relatively high scan speeds, while the cracking suppression mechanism and phase formation in these composites are not clarified. In this work, microstructure evolution and mechanical performance of the LPBF-fabricated Ti/Ce co-modified 2195 are investigated to reveal their cracking suppression and strengthening mechanisms. The results show that apparent grain refinement of the composites is ascribed to high supercooling from rapid formation of constitutional supercooling zone in front of solid-liquid interfaces by high- Q -value Ti solute, and heterogeneous nucleation of in situ formed Al 3 Ti and Al 11 Ce 3 precipitates. Their synergistic interactions promote formation of fine equiaxed grains and thus inhibit crack initiation. The composites exhibit high microhardness of 100±5 HV 0.2 , nano-hardness of 1.6±0.1 GPa and elastic modulus of 97±3 GPa, where the elastic modulus increases by ∼27% and ∼31% compared to those of LPBF-processed and conventionally manufactured 2195 alloys, respectively. A tensile strength of ∼336 MPa and an elongation of ∼3% are obtained from in-situ synchrotron X-ray diffraction measurement. The improved properties are derived from grain refinement and Orowan strengthening. Based on the optimal processing parameter and composition, a bracket component filled with lattice structures is designed and manufactured with good manufacturing quality and processing accuracy.

Laser additive manufacturing of Ti and Ce co-modified 2195 difficult-to-process aluminum alloy: Grain refinement, cracking suppression and enhanced mechanical properties

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Laser powder bed fusion of crack-free 6061Al alloy using nano-sized TiO 2 modified powders

Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion

Laser powder bed fusion of nano-titania modified 2219 aluminium alloy with superior mechanical properties at both room and elevated temperatures: The significant impact of solute

Laser powder bed fusion of crack-free TiN/Al7075 composites with enhanced mechanical properties

Novel approach to additively manufacture high-strength Al alloys by laser powder bed fusion through addition of hybrid grain refiners

Fabrication of Ti3Al-Based Intermetallic Alloy by Laser Powder Bed Fusion Using a Powder Mixture

Effect of lithium anti-ablation and grain refinement introduced by TiC nanoparticles in LPBF Al–Li alloy

Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder bed fusion

Grain refinement and improved tensile properties of Ti5Al2Sn2Zr4Mo4Cr titanium alloy fabricated by laser solid forming

Microstructural Evolution of a High-Strength Zr-Ti-Modified 2139 Aluminum Alloy for Laser Powder Bed Fusion

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

In situ design of ultrafine-grained 7075 Al alloy with laser powder bed fusion

Processing and characterization of crack-free 7075 aluminum alloys with elemental Zr modification by laser powder bed fusion

Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion

Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property

Optimization of Processing Parameters and Microstructure Evolution of (TiB+La 2 O 3 )/Ti6Al4V Manufactured by Laser Melting Deposition

Effect of Ti microalloying and laser remelting on the microstructure and mechanical properties of laser powder bed fusion Al-12Si alloy

Processability of A6061 Aluminum Alloy Using Laser Powder Bed Fusion by In Situ Synthesis of Grain Refiners

Reducing cracking sensitivity of CM247LC processed via laser powder bed fusion through composition modification