Abstract:With the advent of the 5G era, surface acoustic wave (SAW) devices with a larger bandwidth and better temperature stability are strongly required, meanwhile the dimensions of devices are continuously scaling down. In this work, a new layout of ZnO/SiO2/Al2O3 SAW devices with embedded electrodes was developed, and with the help of the finite element method (FEM), the propagation characteristics were simulated. Through adopting embedded electrodes, a large electromechanical coupling coefficient (K2) of 6.6% for the Rayleigh mode can be achieved (5 times larger than that of the conventional ZnO/Al2O3 structure), feasible for wideband SAW devices, and a low acoustic velocity (Vp) of 2960 m/s is exhibited simultaneously, which benefits the miniaturization of SAW devices. The dramatic enhancement of K2 is mainly attributed to the more efficient excitation of SAW in piezoelectric films. Furthermore, a SiO2 overlay is added on the top of the structure to gain an excellent zero temperature coefficient of frequency (TCF). Experimentally, we successfully fabricated SAW one-port resonators based on the proposed structure and good characteristics of high K2, low Vp, and small TCF as simulated were confirmed. Our results show that the proposed structure provides a viable route to design SAW devices with a large bandwidth, small size, and robust temperature compensation for practical use.This article has not yet been cited by other publications.

Power Durability Enhancement and Failure Analysis of TC-SAW Filter with Ti/Cu/Ti/Cu/Ti Electrodes

Enhanced Power Durability of Surface Acoustic Wave Filter with Al/Ti/Cu/Ti Electrodes

Behavior of Al/Cu/Ti Electrodes in Surface Acoustic Wave Filter at High Power

Texture-enhanced Al-Cu Electrodes on Ultrathin Ti Buffer Layers for High-Power Durable 2.6 GHz SAW Filters

SAW Filters with Excellent Temperature Stability and High Power Handling Using LiTaO3/SiC Bonded Wafers

Impact of composition and structure of Al alloy electrodes to power durability of SAW devices

Enhanced Performance of ZnO/SiO 2 /Al 2 O 3 Surface Acoustic Wave Devices with Embedded Electrodes

Enhanced Performance Of Zno/Sio2/Al2o3 Surface Acoustic Wave Devices With Embedded Electrodes

Structure With Thin Siox/Sinx Bilayer And Al Electrodes For High-Frequency, Large-Coupling, And Low-Cost Surface Acoustic Wave Devices

High-Performance Surface Acoustic Wave Devices Using LiNbO3/SiO2/SiC Multilayered Substrates

High-Performance Surface Acoustic Wave Devices Using LiNbO 3 /SiO 2 /SiC Multilayered Substrates

High Frequency, Low Loss and Low TCF Acoustic Devices on LiTaO3-on-SiC Substrate

Wideband and Low-Loss Surface Acoustic Wave Filter Based on 15° YX-LiNbO₃/SiO₂/Si Structure

Near 30% Fractional Bandwidth Surface Acoustic Wave Filters with Novel Electrode Configuration

Improvement of Shape Factor and Loss of Surface Acoustic Wave Resonator Filter Composed of SiO<sub>2</sub>/High-Density-Electrode/LiTaO<sub>3</sub>

A Low-Loss Wideband SAW Filter with Low Drift Using Multilayered Structure

Designed Structures of Interdigital Electrodes for Thin Film SAW Devices

Exploring Low-Loss Surface Acoustic Wave Devices on Heterogeneous Substrates

Effective Improvement of the Micro-Discharge Threshold and Environmental Stability in Microwave Devices Based on Carbon/silver/titanium Composite Films

High-Performance Acoustic Wave Devices on LiTaO$_{3}$/SiC Hetero-Substrates

High-Temperature Conductive Stability of ITO/Pt Bilayer-Film Electrode for Applications in High-Temperature SAW Devices