Abstract:There are many applications for glass-to-glass bonding, such as manufacturing optical devices, electronic components, and microsystem applications. This article presents a simple and effective method for glass-to-glass bonding using laser modification with Ti/Cu/Ti/TiO2 thin films. Ti/Cu/Ti thin films were prepared on glass using magnetron sputtering and then exposed to the atmosphere for 30 min at room temperature for preoxidation to obtain Ti/Cu/Ti/TiO2 thin films. The TiO2 thin film was intentionally formed to improve the bonding quality. To analyze the bonding mechanism, the energy dispersive spectroscopy (EDS) and X-ray photoelectron spectra (XPS) analyses studied the microstructural evolution. The results show that Si diffuses from the glass to the thin films by laser irradiation. The laser beam penetrated the glass and was directly absorbed by the TiO2 thin films. Ti diffuses from the oxide thin film toward the glass, forming Ti–Si covalently structured silicate (the main component is TiSi2) in the bonded region. The formation of TiSi2 is the critical process for this laser bonding. Furthermore, the bonding strengths corresponding to different contact pressures applied during the bonding process were compared and analyzed. The results show that the method achieves more robust glass/TiSi2/Ti/Cu/TiSi2/glass bond pairs with tensile strengths up to 14 MPa and low bonding defect density (< 0.05%). Note that this laser bonding technology was processed at room temperature, allowing the use of thermally sensitive materials in device manufacturing. To verify the application potential of the laser bonding technique in 3-D glass packaging, a simple coplanar waveguide (CPW)–through-glass vias (TGVs)–CPW interconnect structure was developed on three-layer glass interposers in this article. The interconnection loss was successfully measured by constructing a three-layer interconnect structure with laser bonding. The results show that the insertion loss can meet the requirements of glass-based microsystem applications.

Field-assisted Titanium-Glass Bonding.

Evaluation and characterization of titanium to glass anodic bonding

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Research on Silicon-Glass Direct Bonding at Room Temperature

Enhancing Glass-to-Glass Bonding at Room Temperatures Using Laser Surface Modification with Ti/Cu/Ti/TiO2 Thin Films

Influence of Film Thickness of Ti Coating on Bonding Quality of Glass with Pet

Room‐temperature bonding method of bioactive ultrathin glass film on titanium by a dissolution‐polymerization reaction

Plasma Activated Titanium-Based Bonding for Robust and Reliable Si-Si and Si-glass Integration

Influence of Titanium on Low Temperature Active Bonding of Quartz Glass with Bi42Sn2Ag2Ti(Ce,Ga) Alloy Filler

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Study on the mechanism of glass-SiC-glass anodic bonding process

Low-temperature Direct Bonding of Si and Quartz Glass Using the APTES Modification

Interfacial investigation and mechanical properties of glass-Al-glass anodic bonding process

Microstructure and Mechanical Properties of Tempered Glass Joint Bonded with Bi-B-Zn Low Melting Glass

Evaluation of Mechanical Quality of Field-Assisted Diffusion Bonding by Ultrasonic Nondestructive Method

The Authors Declare that They Have No Known Competing Financial Interests or Personal Relationships that Could Have Appeared to Influence the Work Reported in this Paper

Study on the Subsonic Thermal Sprayed Ti/Bioglass Composite Coatings on Titanium Alloy

Characterization, Removal and Evaluation of Oxide Film in the Diffusion Bonding of Zr55Cu30Ni5Al10 Bulk Metallic Glass

Thermal assisted ultrasonic bonding method for poly(methyl methacrylate) (PMMA) microfluidic devices.

Microstructures and Interfacial Quality of Diffusion Bonded TC21 Titanium Alloy Joints

Low-temperature Direct Bonding of Strengthened Glass Chips for Optical Imaging and Co-Packaged Optics