Abstract:Non-destructive tests working at lower microwave frequencies have large advantages of dielectric material penetrability, lower equipment cost, and lower implementation complexity. However, the resolution will become worse as the work frequencies become lower. Relying on designing the structure of high field confinement, this study realizes a simple complementary spiral resonators (CSRs)-based near-field probe for microwave non-destructive testing (NDT) and imaging around 390 MHz (λ = 769 mm) whereby very high resolution (λ/308, 2.5 mm) is achieved. By applying an ingenious structure where a short microstrip is connected to a microstrip ring to feed the CSR, the probe, that is a single-port microwave planar circuit, does not need any extra matching circuits, which has more application potential in sensor arraying compared with other microwave probes. The variation of the electric field distribution with the standoff distance (SOD) between the material under test and the probe are analyzed to reveal the operation mechanisms behind the improved sensitivity and resolution of the proposed probe. Besides, the detection abilities of the tiny defects in metal and non-metal materials are demonstrated by the related experiments. The smallest detectable crack and via in the non-metal materials and the metal materials are of a λ/1538 (0.5 mm) width, a λ/513 (1.5 mm) diameter, a λ/3846 (0.2 mm) width and a λ/513 (1.5 mm) diameter, respectively. Moreover, to further evaluate the performance of the proposed probe, the defects under skin layer in the multilayer composite materials and the defects under corrosion in the carbon steel are inspected and imaged. Due to lower work frequency, high resolution, outstanding detection abilities of tiny defects, and large potentials in sensor arraying, the proposed probe would be a good candidate for microwave NDT and imaging.

Design of Microwave Near-Field Microscope Analyzer for Material Chips and Realization of a System

A Broadband NMR Magnetometer System with Field Searching and Automatic Tuning Function

Thin‐Film‐Lithium‐Niobate Photonic Chip for Ultra‐Wideband and High‐Precision Microwave Frequency Measurement

Experimental study on the characteristics of near‐field distribution of chips based on nano‐diamond quantum magnetometer

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

A Miniature Multi-Component Probe for Near-Field Scanning

Local microwave characterization of metal films using a scanning microwave near-field microscope

Atomic-force-microscope-compatible Near-Field Scanning Microwave Microscope with Separated Excitation and Sensing Probes

T0401-2-1 Development of a Microwave AFM Probe for the Evaluation of Electrical Properties

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

Near-Field Microwave Power and Frequency Measurement With Magnon–Photon Coupled System

A Simple High-resolution Near-field Probe for Microwave Non-Destructive Test and Imaging

J0610104 Evaluation of Interatomic Force on the Tip of Probe by Using Microwave Atomic Force Microscope

An Efficient Probe Calibration Based Near-Field to Near-Field Transformation for EMI Diagnosis

Development of a Millimeter Wave Compact Equipment for NDT of Materials

A Systematic Material Characterization Method via Near-Field Scanning Microwave Microscopy

Probing the Local Microwave Properties of Superconducting Thin Films by a Scanning Microwave Near-Field Microscope

Probe Design and Source Reconstruction for Near-Field Scanning and Modeling

Near-Field Probing of Microwave Oscillators with Josephson Microscopy

Ultra-broadband near-field Josephson microwave microscopy

Preliminary Study on Noncontact Measurement of Mechanical Vibration by Near-field Microwave