Abstract:Rotational speed measurement is important for many applications. Here, a noncontact rotational speed test method based on the detection of the periodically perturbed near-field microwave of an open-ended waveguide is proposed. Both simulations and experiments were conducted to verify the near-field microwave rotational speed sensor. The constructed rotation speed sensing system was composed of a standard open-ended WR-42 waveguide (in our measurements, a waveguide-to-coaxial adapter was used to represent an open-ended waveguide) working at ~18 GHz, a radio frequency (RF) circulator, a signal generator, a, RF detector and an oscilloscope. A rotating fan to be measured was placed close to the waveguide’s mouth and, thus, the waveguide’s reflection coefficient was periodically modulated by the rotating fan blades. Then, the RF detector converted this varying reflection coefficient into a direct current (DC) voltage, namely, a periodical waveform. Finally, the rotational speed of the fan could be extracted from this waveform. Measurements using both the proposed near-field microwave method and conventional optical transmission/reflection methods were conducted for verification. The effect of the rotating fan’s location relative to the waveguide’s mouth was also studied. The results show the following: 1. The proposed method works well with a rotational speed of up to ~5000 RPM (rounds per minute), and an accuracy of 1.7% can be achieved. 2. Metallic or non-metallic fan blades are all suitable for this method. Compared with the existing radar method, the proposed method may be advantageous for rotation detection in a constrained space.

Preliminary Study on Noncontact Measurement of Mechanical Vibration by Near-field Microwave

A Novel Vibration Velocity Measurement Method for Electromagnetic Vibrators

Noncontact acousto-electromagnetic measurement of mechanical resonance in electronic systems

Contactless Micron-Level Vibration Measurement with Millimeter Wave Radar

Noncontact Distance and Amplitude-Independent Vibration Measurement Based on an Extended DACM Algorithm

Measuring Micrometer-Level Vibrations With mmWave Radar

3D Microwave Vibrometer: Contactless Three-Dimensional Vibration Measurements Using Microwave Radars

Noncontact Measurement of Complex Permittivity of Electrically Small Samples at Microwave Frequencies

Microwave Vibrometry: Noncontact Vibration and Deformation Measurement Using Radio Signals

Measurement of microwave electromagnetic parameters of nanostructural magnetic films by using cavity perturbation

mmVib: Micrometer-Level Vibration Measurement with mmWave Radar

Scanning Microwave Vibrometer: Full-Field Vibration Measurement Via Microwave Sensing with Phase-Encoded Beam Scanning.

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Vibration Measurement and Analysis of Rotary Tools Using Millimeter-Wave Sensor

Noncontact Rotational Speed Measurement with Near-Field Microwave of Open-Ended Waveguide

Micro-vibration measuring technology based on heterodyne interference

Ultra-micro Vibration Measurement Method Using CW Doppler Radar

Multi-scale and Full-Field Vibration Measurement Via Millimetre-Wave Sensing

Study on a Miniaturized Microwave Near-Field Probe Based on Split Ring Resonator

<i>RF-Ear<SUP>+</SUP> :</i> A Mechanical Identification and Troubleshooting System Based on Contactless Vibration Sensing

Passive Mechanical Vibration Processor for Wireless Vibration Sensing