Abstract:A non-contact testing and characterization method based on air-coupled acoustic excitation and interferometric displacement measurements of micro-scale MEMS structures at room conditions is introduced. In demonstrating its potential uses in testing and characterization, the present non-contact approach is applied to (i) micro-cantilever beams and (ii) rotational disk oscillators. Air-coupled multi-mode excitation of micromechanical cantilever-type oscillators under a pulsed acoustic field generated by an air-coupled transducer is demonstrated and reported. Also, the testing and characterization of a micro-scale rotational disk oscillator developed for a new class of sensor platform is demonstrated. The main design objective of the rotational disk oscillator class is to overcome the out-of-plane motion related sensitivity limitations of the cantilever-based sensors at high frequency operations. The dynamics of the rotational disk oscillators is more complex than micro-cantilever beams due to its in-plane motion in addition to its various out-of-plane modes of vibration. The fabrication of a rotational disk oscillator requires a suspended disk whose underside is visibly inaccessible due to a narrow micro-gap. In addition to the dynamic characterization of the cantilever beams and rotational disk oscillators, the current investigation demonstrates that the presented approach can address unique structural concerns such as the verification of a gap separation of the rotational oscillator from the underlying silicon substrate. Utilizing the proposed technique, the resonant frequencies of the oscillator structures are obtained and its potential uses in the testing and characterization of micro-scale structures are discussed. The major specific advantages of the introduced approach include that (i) its noncontact nature can eliminate testing problems associated with stiction and adhesion, and (ii) it allows direct mechanical characterization and testing of components and sub-components of a micro-scale devices.

Noncontact acousto-electromagnetic measurement of mechanical resonance in electronic systems

Ultrasensitive charge detection utilizing coupled nonlinear micromechanical resonators

Noncontact Distance and Amplitude-Independent Vibration Measurement Based on an Extended DACM Algorithm

Non-contact measurement of complex permittivity based on coupled magnetic and electric resonances

Contactless Micron-Level Vibration Measurement with Millimeter Wave Radar

Preliminary Study on Noncontact Measurement of Mechanical Vibration by Near-field Microwave

Noncontact Intelligent Vibrometer Based on Laser Triangulation

Noncontact measurement of complex permittivity based on the principle of mid-range wireless power transfer

Non-Contact Mechanical Testing and Characterization of Micro-Scale Structures

Noncontact Measurement of Complex Permittivity of Electrically Small Samples at Microwave Frequencies

<i>RF-Ear<SUP>+</SUP> :</i> A Mechanical Identification and Troubleshooting System Based on Contactless Vibration Sensing

Ultrasensitive Resonant Electrometry Utilizing Micromechanical Oscillators

Accessing nanomechanical resonators via a fast microwave circuit

A measuring method for the resonant frequency of flexural horn-type transducer using non-contacting piezoelectric sensor

Application of Air-Coupled Ultrasonic Nondestructive Testing in the Measurement of Elastic Modulus of Materials

RF-Ear$^+$ : A Mechanical Identification and Troubleshooting System based on Contactless Vibration Sensing

Inline Measurement of Acoustoelastic Coefficient in Conductive Sheet Material With Electromagnetic Loading System

Ultrawideband Real-Time Monitoring System Based on Electro-Optical Under-Sampling and Data Acquisition for Near-Field Measurement

Multi-modal resonance measurement capable of discerning and visualizing effects due to excitation schemes in mems resonator

DEVELOPMENT OF RESEARCH ON ELECTROMAGNETIC ACOUSTIC TRANSDUCER FOR NONDESTRUCTIVE TESTING

Passive Mechanical Vibration Processor for Wireless Vibration Sensing