Abstract:The strong piezoelectric field present in InGaN/GaN heterostructure quantum wells severely reduces the light emission efficiency of multiple quantum well (MQW) structures. To address this issue, a strain modulation interlayer is commonly used to mitigate the piezoelectric polarization field and improve the luminescence performance of the devices. To investigate the impact and mechanism of strain modulation in the InGaN/GaN superlattice (SL), epitaxial wafers were fabricated with an n-type InGaN/GaN SL interlayer sample, along with a corresponding control sample. By measuring the temperature-dependent photoluminescence (PL) spectra of the epitaxial wafers, experimental results show that the introduction of an SL interlayer leads to a shorter emission wavelength and an enhanced internal quantum efficiency. As the temperature increases, a blue shift of the PL peak is observed. However, for the sample with an SL interlayer, the blue shift of the PL peak with temperature is relatively small. Electroluminescence (EL) experiments indicate that the introduction of an SL interlayer significantly increases the integrated intensity of the EL peak and reduces its full width at half maximum. These phenomena collectively suggest that the incorporation of a superlattice interlayer can partially suppress the quantum-confined Stark effect (QCSE) that affects the light emission efficiency. Theoretical calculations demonstrated that the introduction of a superlattice strain layer before the growth of the multiple quantum well active region can weaken the polarization-induced built-in electric field, reduce the tilt of the energy bands in the multiple quantum well active region, increase the overlap of electron and hole wave functions, enhance the emission probability, shorten the radiative recombination lifetime, and promote competition between radiative and non-radiative recombination, thereby achieving higher recombination efficiency and improved light emission intensity. This study provides experimental and theoretical evidence that the strain modulation SL interlayer can effectively improve the device performance and offer guidance for optimizing the structural design of devices.

Theoretical Study and Optimization of the Green InGaN/GaN Multiple Quantum Wells with Pre-Layer

Green InGaN/GaN Multiple-Quantum-Wells with Pre-layer for High-efficiency mini-LEDs

Thermal Stress Analysis and Structural Design of AlxGa1−xN/GaN Epilayers Based on Si Substrate

Investigation of Optical Properties of InGaN–InN–InGaN/GaN Quantum-Well in the Green Spectral Regime

Study on the strain modulation effect of superlattice interlayer on InGaN/GaN multiple quantum well

Photoluminescence of Green InGaN/GaN MQWs Grown on Pre-Wells*

Photoluminescence of InGaN/AlGaN Strained Multiple Quantum Wells Influenced by Dry Etching

Effects of InGaN Barriers with Low Indium Content on Internal Quantum Efficiency of Blue InGaN Multiple Quantum Wells

Effect of InAs insertion layer on the structural and optical property improvement of InGaAs/InAlAs multiple quantum wells

Study on internal quantum efficiency of blue InGaN multiple-quantum-well with an InGaN underneath layer

Influence of growth process of GaN HT buffer layer on InGaN/GaN MQWs

Improvement of Structural and Luminescence Properties in InGaN/GaN Multiple Quantum Wells by Symmetrical Thin Low Temperature-Gan Layers

High-efficiency InGaN/AlInGaN multiple quantum wells with lattice-matched AlInGaN superlattices barrier*

Effects of a Prestrained InGaN Interlayer on the Emission Properties of InGaN/GaN Multiple Quantum Wells in a Laser Diode Structure

Different Strain Relief Behaviors in Al0.35ga0.65n/Gan Multiple Quantum Wells on Gan/Sapphire Templates with Aln/Gan Supperlattices and Low-Temperature Aln Interlayers

Fabrication and Characterization of Novel Monolayer InN Quantum Wells in a GaN Matrix

Effect Of Critical Thickness On Structural And Optical Properties Of Inxga1-Xn/Gan Multiple Quantum Wells

Study on Structure Optimization of Strain-compensated InGaN-AlGaN Quantum Well Light-emitting Diode

Electroluminescence Property Improvement by Adjusting Quantum Wells’ Position Relative to P-Doped Region in InGaN/GaN Multiple-Quantum-well Light Emitting Diodes

Improved carrier transport and photoelectric properties of InGaN/GaN multiple quantum wells with wider well and narrower barrier

Origin of GaN-InGaN-GaN barriers in enhancing the hole injection for InGaN/GaN green light-emitting diodes