Abstract:A multi-parameter sensor based on dumbbell-shaped double-cladding fiber (DCF) structure cascaded long period fiber grating (LPFG) is proposed and fabricated. It is formed by discharging between single mode fiber (SMF) and DCF to form a waist-enlarged taper and then cascading two LPFGs. When the fiber is affected by the thermal expansion effect, thermo-optic effect and elasto-optic effect, the resonant peaks formed by inter-mode interference will shift, and the shifts generated by different resonant peaks are also different. By demodulating the wavelength shift of the three resonant peaks, the temperature, refractive index and axial strain can be measured by using the coefficient sensitivity matrix. The experimental results show that the temperature sensitivity of the three resonance peaks is 14.79 pm/°C, 69.07 pm/°C and 89.83 pm/°C in the range of 25 °C~80 °C. The refractive index sensitivities of three resonance peaks are 14.27 nm/RIU, −71.39 nm/RIU and −141.07nm/RIU in the range of 1.3355 ~ 1.3715. The axial strain sensitivities of three resonance peaks are −2.26 pm/ , −2.5pm/ and −3.14 pm/ in the range of ~ . The corresponding resolutions are 0.6905 °C, 0.00054RIU and , respectively. The sensor is simple and has good linearity. It can be widely used in environmental monitoring for different parameter.

A Long Period Grating Sensor Based on Helical Capillary Optical Fiber

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

High-sensitivity Strain Sensor Based on a Helical-Core Long-Period Fiber Grating.

A Novel High-Sensitivity Fiber Grating Sensor for Simultaneous Measurement of Temperature and Pressure

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity

Strain, torsion and refractive index sensors based on helical long period fibre grating inscribed in small-core fibre for structural condition monitoring

Highly Sensitive Temperature-Independent Strain Sensor Based on a Long-Period Fiber Grating with a CO$_{2}$-Laser Engraved Rotary Structure

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

Temperature self-compensation strain sensor based on cascaded concave-lens-like long-period fiber gratings

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

A Simple Strain Sensor Using Polymer Fiber Bragg Grating and Long-Period Fiber Grating

High-Sensitivity Salinity Sensor Based on Helical Long-Period Fiber Grating in Thin-cladding Fiber

A Compact Strain Sensor Based on M-shaped-core Long-Period Fiber Grating

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System

Ultrasensitive temperature sensor based on a urethane acrylate-coated off-axis spiral long period fiber grating

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating