Abstract:The continuous exploitation of zinc blend resources leads to primary resources may not be sufficient for future requirements. The abundant low-grade lead–zinc oxysulphide ore will become a crucial source of zinc metal. Thus, methods for utilising low-grade lead–zinc ore resources must be urgently developed; this can contribute to achieving considerable economic value. By studying the mineral technology and thermodynamics of low-grade lead–zinc oxysulphide ore, a Box–Behnken design model of response surface methodology was created to explore the impact of various factors, such as reduction time, temperature, and carbon mass ratio. The outcomes of the study indicate that the aforementioned factors have a significant impact on the zinc volatilisation rate, and it reaches 99.01% under the optimum conditions of 1174 °C, 86 min, and 12% carbon mass ratio. In addition, compared with the carbothermal reduction in air, the carbon mass ratio requirement is reduced by 10–20% in the inert atmosphere. The volatilisation mechanism of zinc, particularly the distribution and migration behaviour, was studied using X-ray diffraction and scanning electron microscopy–energy dispersive X-ray spectroscopy. The results showed that in the high-temperature section of the lead–zinc ore treatment, zinc sulphide and zinc oxide are transformed via synergistic reduction involving carbon and calcium to zinc, and the presence of iron and calcium in the form of sulphides leads to a decrease in sulphur dioxide formation. This study explores the efficient and green development and utilization of low-grade lead–zinc oxysulphide ore by pyrometallurgical method to provide theoretical support for its large-scale industrial treatment.

Phase Transformation Behavior of Lead and Zinc in the High-Lead Slag Reduction Process

The effect of coal ratio on the high-lead slag reduction process

Probing Study on Separating Pb, Zn, and Fe from Lead Slag by Coal-based Direct Reduction

Kinetics study of heavy metal removal from the lead smelting slag by carbothermic reduction: Effect of phase transformation

Phase Transformation Analysis and Process Optimisation of Low-Grade Lead–Zinc Oxysulphide Ore Carbothermal Reduction

Volatilization Kinetics of Zinc from the Flotation Products of Low-Grade Lead–Zinc Oxide Ore during Carbothermic Reduction

Mineral Evolution Mechanism of Zinc-slag during High-temperature Reactive Process

Technology Study on Direct Reduction of Lead-Rich Slag

Kinetic and Thermodynamic Studies on Lead-Rich Slag Reduction at Various CaO/SiO2 Ratios

Slag Reduction Kinetics of a Lead Slag from a Secondary Lead Smelter

Thermodynamic analysis of the bottom-blown direct reduction of lead sulfate with carbon

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Enhanced recovery of zinc and lead by slag composition optimization in rotary kiln

Thermodynamic analysis and process optimization of zinc and lead recovery from copper smelting slag with chlorination roasting

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Recovery of Zinc and Copper from Lead Slag by the Combined Process of Beneficiation and Roasting

Volatilization characteristics of high-lead slag and its influence on measurement of physicochemical properties at high temperature

Equilibrium Analysis of Lead in Hazardous Waste During Co-Processing with Cement Kiln

Effects of CaO, Al2O3 and MgO on Kinetics of Lead-Rich Slag Reduction

Volatilisation Behaviour and Mechanism of Lead-Containing Slag during Physical Property Tests