Abstract:The effective recovery of metallic iron and vanadium from steel slag and ensuring the gelling properties of the residual slag after metal separation are crucial for their high-value-added utilisation. In this study, we established suitable process conditions for high-temperature reduction and reconstruction using the Si/Al ratio as an adjustment parameter and employing rice husk ash, SiO 2 , and Al 2 O 3 as the adjustment materials. The influence of the reconstructed steel slag composition and structure on the iron reduction rate and vanadium migration was investigated. Additionally, we tested the compressive strength of the cement slurry at different times to compare the gelling performance of the tailings after iron reduction from the Vanadium-containing steel slag.The results showed that the high-temperature reduction method effectively reduced metallic iron and vanadium in the steel slag. The iron reduction rate reached as high as 98.53%, and inert components such as the CaO-FeO-MgO-MnO solid solution (RO) phase, C 2 F, and Fe 3 O 4 in the original steel slag could be effectively reconstructed to form a glass-phase structure with certain gelling properties. Moreover, the content of the glass phase remained stable above 90%. For the same temperature, the liquid viscosity of the reconstructed steel slag increased, and after cooling, the glass-phase content decreased with decreasing Si/Al ratio. This resulted in an increase in the amount of crystalline-phase minerals such as Ca 3 Mg(SiO 4 ) 2 , Ca 2 Al 2 SiO 7 , and C 2 S. The iron reduction rate generally exhibited a downward trend, and the change in the vanadium content was consistent with the iron reduction rate. Following the reduction and reconstruction of iron separation, the gelling properties of the vanadium-containing steel slag improved, with a 28-day strength that was 64.26% higher than that of the original steel slag.

Technology Study on Direct Reduction of Lead-Rich Slag

Probing Study on Separating Pb, Zn, and Fe from Lead Slag by Coal-based Direct Reduction

Kinetic and Thermodynamic Studies on Lead-Rich Slag Reduction at Various CaO/SiO2 Ratios

The effect of coal ratio on the high-lead slag reduction process

Utilization and detoxification of gypsum sludge by replacing limestone in reduction smelting of high lead slag

Effects of CaO, Al2O3 and MgO on Kinetics of Lead-Rich Slag Reduction

Study on oxygen side-blown reducing furnace and smelting reduction process of high-lead slag

Ferrous low alloy making from Jinchuan flash smelting slag by smelting reduction

Recovery of Zinc and Copper from Lead Slag by the Combined Process of Beneficiation and Roasting

Thermodynamic analysis of the bottom-blown direct reduction of lead sulfate with carbon

Slag Reduction Kinetics of a Lead Slag from a Secondary Lead Smelter

Kinetics study of heavy metal removal from the lead smelting slag by carbothermic reduction: Effect of phase transformation

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Lead Recovery from a Lead Concentrate throughout Direct Smelting Reduction Process with Mixtures of Na2CO3 and SiC to 1000 °C

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag

Recovery of Copper, Lead and Zinc from Copper Flash Converting Slag by the Sulfurization-Reduction Process

Reduction of Copper Smelting Slag by Carbon for Smelting Cu-Fe Alloy

Experiment on Reducing Agent for Recovering Iron from Pyrite Sulfur Refining Slag by Reduction Roasting and Magnetic Separation

Steel Slag Reconstruction Experiment by Reduction FeOx and Its Mineral Composition

Experimental study on the copper slag reduction process

Reduction and reconstruction of vanadium-containing steel slag at high temperature