Regulating Oxygen Vacancies in Ultrathin Δ-Mno2 Nanosheets with Superior Activity for Gaseous Ozone Decomposition

Ranran Cao,Lianxin Li,Pengyi Zhang,Lele Gao,Shaopeng Rong

DOI: https://doi.org/10.1039/d1en00149c

2021-01-01

Environmental Science Nano

Abstract:For ozone decomposition, ultrathin δ-MnO2 nanosheets were synthesized and the properties of oxygen vacancies were regulated. The as-synthesized catalyst exhibited superior activity.

What problem does this paper attempt to address?

Oxygen vacancy modulation of two-dimensional γ-Ga2O3 nanosheets as efficient catalysts for photocatalytic hydrogen evolution

Xiaoyan Zhang,Zizhong Zhang,Huijuan Huang,Ying Wang,Na Tong,Jinjin Lin,Dan Liu,Xuxu Wang

DOI: https://doi.org/10.1039/c8nr07186a

IF: 6.7

2018-12-07

Nanoscale

Abstract:Controlling the creation of oxygen vacancies can effectively regulate the optical and electronic properties of metal oxide nanomaterials. Over the past several decades, numerous metal oxides with oxygen vacancies have been developed. However, an investigation about oxygen vacancies leading to the formation of nanosheets with different thicknesses has not been available up to now. Here, we report the oxygen vacancy modulated formation of γ-Ga2O3 nanosheets and demonstrate that the thickness of the nanosheets is not the decisive factor in the photocatalytic hydrogen evolution reaction of ultrathin 2D nanosheets. Detailed structural characterization indicated that γ-Ga2O3 prepared at 160 °C (γ-160) with a morphology of ultrathin nanosheets possesses the highest oxygen vacancy concentration and an optimal thickness of the nanosheets. The enhanced photocatalytic performance could be determined from the synergistic effects between the ultrathin 2D structure and the O-vacancies confined in the ultrathin nanosheets. This work provides an efficient strategy to regulate the formation of nanosheets at the atomic scale and enrich the study on the effect of oxygen vacancies in the photocatalytic water splitting reaction.
Surface Oxygen Vacancy Induced Α-Mno2 Nanofiber for Highly Efficient Ozone Elimination

Guoxiang Zhu,Jinguo Zhu,Wenjun Jiang,Zijian Zhang,Jun Wang,Yongfa Zhu,Qianfan Zhang

DOI: https://doi.org/10.1016/j.apcatb.2017.02.068

2017-01-01

Abstract:alpha-MnO2 nanofiber with high concentration of surface oxygen vacancy was obtained via vacuum deoxidation method. The activity of alpha-MnO2 strongly depends on the concentration and extent of oxygen vacancy, which can be adjusted by tuning the temperature and time of vacuum deoxidation. The formation of oxygen vacancy enhanced the ratio of Mn3+/Mn4+, which changed the charge distribution on the alpha-MnO2 nanofiber, resulting in a significant improvement of the adsorption of ozone on the surface of the catalyst. In the dry gas flow, the ozone removal rate at 20 h has increased from 32.6% to 95%. In the wet gas flow, the ozone removal rate was also enhanced thanks to more active sites offered by alpha-MnO2. What's more, we found that the deactivation caused by water vapor was temporary and the activity would recover once the humidity has decreased. Finally, DFT calculation revealed that surface oxygen vacancy was the adsorption and reaction site for ozone decomposition and a new mechanism of ozone decomposition in the presence of H2O also was proposed. This work developed a deeper understanding to the process of ozone decomposition and would promote manganese oxide catalyst for practical application. (C) 2017 Elsevier B.V. All rights reserved.
To Promote Ozone Catalytic Decomposition by Fabricating Manganese Vacancies in ε-MnO2 Catalyst via Selective Dissolution of Mn-Li Precursors

Wei Hong,Mingpan Shao,Tianle Zhu,Haining Wang,Ye Sun,Fangxia Shen,Xiang Li

DOI: https://doi.org/10.1016/j.apcatb.2020.119088

2020-10-01

Abstract:ε-MnO2 catalysts with Mn vacancies and appropriate Li+ were designed with the help of density functional theory calculations (DFT) and prepared by a novel selective dissolution strategy. Their physiochemical properties were characterized and catalytic activity for ozone decomposition evaluated. DFT calculations showed that Mn vacancies and appropriate amounts of Li+ in ε-MnO2 facilitated the formation of oxygen vacancies, decreased adsorption ability for H2O and O2, and maintained high adsorption ability for O3 on these oxygen vacancies. Characterization results showed that preparing ε-MnO2 by selective dissolution of Mn-Li precursors with 0.5 M HCl produced more Mn vacancies, and, thus, weaker crystallinity, larger specific surface area, superior reducibility, better oxygen storage capacity, and higher oxygen vacancies. This catalyst exhibited excellent activity and stability for ozone decomposition. Furthermore, a possible mechanism for ozone decomposition by the synergy of Li+, Mn vacancies, and oxygen vacancies in ε-MnO2 was proposed.

chemistry, physical,engineering, chemical, environmental
Space-confined manganese oxides nanosheets for efficient catalytic decomposition of ozone

Yunjun Yang,Jialin Li,Zhijian Xiao,Yang Yun,Mingshan Zhu,Jingling Yang

DOI: https://doi.org/10.1016/j.chemosphere.2024.142113

IF: 8.8

2024-04-28

Chemosphere

Abstract:Ground-level ozone has long posed a substantial menace to human well-being and the ecological milieu. The widely reported manganese-based catalysts for ozone decomposition still facing the persisting issues encompass inefficiency and instability. To surmount these challenges, we developed a mesoporous silica thin films with perpendicular nanochannels (SBA(⊥)) confined Mn 3 O 4 catalyst (Mn 3 O 4 @SBA(⊥)). Under a weight hourly space velocity (WHSV) of 500,000 mL g −1 h −1 , the Mn 3 O 4 @SBA(⊥) catalyst exhibited 100% ozone decomposition efficiency in 5 h and stability across a wide humidity range, which exceed the performance of bulk Mn 3 O 4 and Mn 3 O 4 confine in commonly reported SBA-15. Rapidly decompose 20 ppm O 3 to a safety level below 100 μg m −3 in the presence of dust in smog chamber (60 × 60 × 60 cm) was also realized. This prominent catalytic performance can be attributed to the unique confined structure engenders the highly exposed active sites, facilitate the reactant-active sites contact and impeded the water accumulation on the active sites. This work offers new insights into the design of confined structure catalysts for air purification.

environmental sciences
Unlocking efficient and robust ozone decomposition with CNT-confined manganese oxide via synergistic electronic modulation

Bin Liu,Ziran Yi,Yunjun Yang,Yatai Li,Jingling Yang,Mingshan Zhu

DOI: https://doi.org/10.1016/j.apcatb.2023.122788

2023-04-01

Abstract:Manganese oxides (MnO2)-based catalysts are prominent candidates for ozone elimination, which always bear the accumulation of the intermediate oxygen species and water, resulting in unsatisfactory catalytic efficiency. To overcome this critical defect, we propose carbon nanotubes confined MnO2 catalysts (MnO2-in-CNT) for efficient and stable ozone decomposition over a wide relative humidity range (RH, 15–90%). Strikingly, the catalyst exhibits an efficient and sustainable ozone conversion (98%) over 100 h under a gas hourly space velocity (GHSV) of 600,000 mL g−1 h−1 and RH of 15%, and durability under high RH (77% over 50 h, RH 70%), well beyond its unconfined analog and most reported works. This excellent catalytic performance can be attributed to the facilitated intermediate desorption on active sites and the confined structure alleviated the effect of water on inner MnO2. This discovery is expected to drive great progress in the applications of confined-structure catalysts for air purification.

chemistry, physical,engineering, chemical, environmental
Insights into the Reactive and Deactivation Mechanisms of Manganese Oxides for Ozone Elimination: The Roles of Surface Oxygen Species

Lei Zhang,Sheng Wang,Lirong Lv,Ya Ding,Dongxu Tian,Shudong Wang

DOI: https://doi.org/10.1021/acs.langmuir.0c02841

IF: 3.9

2021-01-25

Langmuir

Abstract:Manganese oxides with varied Mn valance states but identical morphologies were synthesized via a facile thermal treatment of γ-MnOOH. Also, their catalytic performance on ozone decomposition was investigated following the order of Mn3O4 < Mn2O3 < MnO2 < MnO2-H-200. In combination with X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), transmission electron microscopy (TEM), H2-temperature-programmed reduction (TPR), O2-temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS) characterization, it was deduced that the superior O3 decomposition capacity for MnO2-H-200 was strongly associated with abundant oxygen vacancies on its surface. Among Mn3O4, Mn2O3, and MnO2, the difference in O3 decomposition efficiency was dependent on the divergent nature of oxygen vacancy. Density functional theory (DFT) calculation revealed that Mn3O4 and MnO2 possessed lower formation energy of oxygen vacancy, while MnO2 had the minimum desorption energy of peroxide species (O2*). It was deduced that the promotion of the O3 decomposition capability was attributed to the easier O2* desorption. Insights into the deactivation mechanism for MnO2-H-200 further validated the assumptions. As the reaction proceeded, adsorbed oxygen species accumulated on the catalyst surface, and a portion of them were transformed to lattice oxygen. The consumption of oxygen vacancy led to the deactivation of the catalyst.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.langmuir.0c02841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.langmuir.0c02841</a>.Catalyst preparation; catalyst characterization; XRD patterns of the as-prepared γ-MnOOH; N2 adsorption and desorption isotherms of different MnOx catalysts; top plane view and the oxygen vacancy sites of the preferentially exposed crystal plane for various MnOx during DFT calculation; FT-IR spectra of MnO2-H-200 and partially deactivate MnO2-H-200 catalysts; ozone conversion over MnO2-H-200 and the regenerated MnO2-H-200; the pore size distribution of different MnOx catalysts calculated by the BJH method (<a class="ext-link" href="/doi/suppl/10.1021/acs.langmuir.0c02841/suppl_file/la0c02841_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary, physical,materials science
Tuning the K+ Concentration in the Tunnels of Α-Mno2 to Increase the Content of Oxygen Vacancy for Ozone Elimination.

Guoxiang Zhu,Jinguo Zhu,Wenlu Li,Wenqing Yao,Ruilong Zong,Yongfa Zhu,Qianfan Zhang

DOI: https://doi.org/10.1021/acs.est.8b01594

IF: 11.4

2018-01-01

Environmental Science & Technology

Abstract:α-MnO2 is a promising material for ozone catalytic decomposition and the oxygen vacancy is often regarded as the active site for ozone adsorption and decomposition. Here, α-MnO2 nanowire with tunable K+ concentration was prepared through a hydrothermal process in KOH solution. High concentration K+ in the tunnel can expand crystal cell and break the charge balance, leading to a lower average oxidation state (AOS) of Mn, which means abundant oxygen vacancy. DFT calculation has also proven that the samples with higher K+ concentration exhibit lower formation energy for oxygen vacancy. Due to the enormous active oxygen vacancies existing in the α-MnO2 nanowire, the lifetime of the catalyst (corresponding to 100% ozone removal rate, 25 °C) is increased from 3 to 15 h. The FT-IR results confirmed that the accumulation of intermediate oxygen species on the catalyst surface is the main reason why it is deactivated after long time reaction. In this work, the performance of the catalyst has been improved because the abundant active oxygen vacancies are fabricated by the electrostatic interaction between oxygen atoms inside the tunnels and the introduced K+, which offers us a new perspective to design a high efficiency catalyst and may promote manganese oxide for practical ozone elimination.
Encapsulate α-MnO2 nanofiber within graphene layer to tune surface electronic structure for efficient ozone decomposition

Guoxiang Zhu,Wei Zhu,Yang Lou,Jun Ma,Wenqing Yao,Ruilong Zong,Yongfa Zhu

DOI: https://doi.org/10.1038/s41467-021-24424-x

IF: 16.6

2021-07-06

Nature Communications

Abstract:Abstract Major challenges encountered when developing manganese-based materials for ozone decomposition are related to the low stability and water inactivation. To solve these problems, a hierarchical structure consisted of graphene encapsulating α-MnO 2 nanofiber was developed. The optimized catalyst exhibited a stable ozone conversion efficiency of 80% and excellent stability over 100 h under a relative humidity (RH) of 20%. Even though the RH increased to 50%, the ozone conversion also reached 70%, well beyond the performance of α-MnO 2 nanofiber. Here, surface graphite carbon was activated by capturing the electron from inner unsaturated Mn atoms. The excellent stability originated from the moderate local work function, which compromised the reaction barriers in the adsorption of ozone molecule and the desorption of the intermediate oxygen species. The hydrophobic graphene shells hindered the chemisorption of water vapour, consequently enhanced its water resistance. This work offered insights for catalyst design and would promote the practical application of manganese-based catalysts in ozone decomposition.

multidisciplinary sciences
Thermal Annealing Induced Surface Oxygen Vacancy Clusters in α-MnO2 Nanowires for Catalytic Ozonation of VOCs at Ambient Temperature.

Yuqin Lu,Ting Pan,Changbin Zhang,Hong He,Hua Deng

DOI: https://doi.org/10.1021/acsami.2c21120

2023-02-08

Abstract:Catalytic ozonation has gained considerable interest in volatile organic compound (VOC) elimination due to its mild reaction conditions. However, the low activity and mineralization rate of VOCs over catalysts hinder its practical application. Herein, a series of α-MnO2 nanowire catalysts were prepared via thermal annealing treatment at various temperatures to tailor defect species. Numerous characterization techniques were used and combined to investigate the relationship between activity and microstructure. PALS and XAFS indicated that more unsaturated manganese and oxygen vacancies, especially surface oxygen vacancy clusters, were produced in α-MnO2 under the optimal high calcination temperature. As a result, MnO2-600 was found to exhibit the best-ever performance in toluene conversion (95%) and mineralization rate (89.5%) at 20 °C, making it a promising candidate for practical use. The roles of these defects in manipulating the reactive oxygen species of α-MnO2 were clarified by quantifying the amounts of reactive oxygen species by quenching experiments and density functional theory calculations. 1O2 and ·OH species generated in the vicinity of oxygen vacancy clusters, especially the dimer oxygen vacancy cluster, were identified as key oxygen species in the abatement of toluene. This study provides a facile method to engineer the microstructure of MnO2 by means of the manipulation of oxygen vacancies and an in-depth understanding of their roles in the catalytic ozonation of VOC.

Environmental Science,Chemistry,Medicine,Materials Science
Porous manganese oxides synthesized with natural products at room temperature: a superior humidity-tolerant catalyst for ozone decomposition

Lianxin Li,Pengyi Zhang,Ranran Cao

DOI: https://doi.org/10.1039/d0cy00196a

2020-01-01

Abstract:Porous cerium-doped manganese oxides have been facilely synthesized with dopamine and exhibit prominent activity and humidity tolerance for O 3 decomposition.

chemistry, physical
Catalytic Decomposition of Gaseous Ozone over Manganese Dioxides with Different Crystal Structures

Jingbo Jia,Pengyi Zhang,Long Chen

DOI: https://doi.org/10.1016/j.apcatb.2016.02.055

2016-01-01

Abstract:Ozone is a ubiquitous pollutant and manganese dioxide (MnO2) has been widely used for ozone decomposition. However, the effect of MnO2 structure on ozone decomposition has never been investigated. Three tunnel-structure polymorphs, i.e., alpha-, beta- and gamma-MnO2 were prepared and characterized by BET, TEM, XRD, H-2-TPR, O-2-TPD, NH3-TPD, TGA-MS and XPS. The activity of three MnO2 polymorphs for ozone decomposition followed the order of alpha->gamma->beta-MnO2. The alpha-MnO2 owned the largest specific surface area and lowest average oxidation state of Mn. Furthermore, the adsorbed oxygen species on the surface of alpha-MnO2 were more easily reduced. In-situ Raman spectroscopy results showed that peroxide species formed during ozone decomposition, and over alpha-MnO2 they were more easily decomposed by increasing reaction temperature. It was found that the catalytic activity of MnO2 strongly depended on the density of oxygen vacancies. Accordingly, the ozone decomposition mechanism based on the involvement and recycling of oxygen vacancy (V-O) is proposed. The decomposition of peroxide species is a rate-limiting step. These findings are helpful for designing more effective catalyst for ozone removal. (C) 2016 Elsevier B.V. All rights reserved.
Oxygen vacancy induced MnO 2 catalysts for efficient toluene catalytic oxidation

Jia Zeng,Hongmei Xie,Zhao Liu,Xuecheng Liu,Guilin Zhou,Yi Jiang

DOI: https://doi.org/10.1039/d1cy01274f

2021-01-01

Abstract:The α-MnO 2 , with abundant oxygen vacancies, facilitates the adsorption and activation of O 2 to produce active adsorbed oxygen species and weakens lattice oxygens species. These oxygen species can significantly improve toluene catalytic oxidation.

chemistry, physical
Unravelling the efficient catalytic performance of ozone decomposition over nitrogen-doped manganese oxide catalysts under high humidity

Chentao Fang,Caihong Hu,Dandan Li,Jian Chen,Mengfei Luo

DOI: https://doi.org/10.1039/d0nj04393a

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:Nitrogen-doped Mn species, coated with a carbon layer of several nanometers in thickness, for enhanced water vapor resistance.

chemistry, multidisciplinary
Oxygen Vacancy Rich Δ-Mno2 Nanosheets Encapsulating Single Cobalt Atoms-Anchored Carbon Nanotubes for Efficient Oxygen Evolution

Yan Cheng,Bo Cao,Xuan Xu,Lele Peng,Baocang Liu,Jinlu He,Jun Zhang

DOI: https://doi.org/10.1016/j.mtener.2024.101515

IF: 9.257

2024-01-01

Materials Today Energy

Abstract:Oxygen vacancy (OVac) and interface engineering are effective tactics for regulating the electronic structure of electrocatalysts and optimizing the absorption/desorption of reactants and intermediates on the catalyst surface to enhance the oxygen evolution reaction (OER). Herein, a self-supported electrocatalyst, comprising delta-MnO2 nanosheets grown on Co single atoms (CoSAs) anchored on N-doped carbon nanotubes (NCNTs) embedded with Co nanoparticle on a carbon cloth (CC) (delta-MnO2/Co-NP@Co-SAs-NCNTs/CC), was fabricated. Through insitu growth of delta-MnO2 nanosheets on Co-NP@Co-SAs-NCNTs/CC, the number of OVac is increased, as proved by X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and Positron annihilation lifetime spectrometer (PALS), due to the redox between MnO2 and Co. Experimental results and theoretical calculations confirm that the formation of OVac rich delta-MnO2 nanosheets and the construction of heterogeneous interface between delta-MnO2 and Co-SAs-NCNTs endow the electrocatalyst with good conductivity, fast charge transfer, and multiple active sites, leading to rapid OER kinetics. Therefore, the delta-MnO2/Co-NP@Co-SAs-NCNTs/CC electrocatalyst demonstrates remarkable OER performance, requiring only 165 mV overpotential to reach a current density of 10 mA/cm(2) in an alkaline solution. (c) 2024 Elsevier Ltd. All rights reserved.
Birnessite-Type Manganese Dioxide Nanosheets on Metal–Organic Frameworks with High Catalytic Activity in Ozone Decomposition

Yu-Hui Liu,Jia-Ao Lv,Ming-Ming Xu,Chen Dong,Xiao-Min Liu,Jian-Rong Li,Lin-Hua Xie

DOI: https://doi.org/10.1021/acsanm.3c00917

IF: 6.14

2023-04-21

ACS Applied Nano Materials

Abstract:Ground-level ozone (O3) poses a threat to both human health and ecosystems; the development of O3 decomposition catalysts is thus of fundamental and practical significance. In the past decades, metal oxides have been widely investigated for O3 elimination due to their low cost and high catalytic activity. Recently, it has been demonstrated that metal–organic frameworks (MOFs) could also show high performance in the removal of O3 and even other airborne gaseous pollutants at the same time. Herein, we report a facile synthetic method to prepare the composite of the well-known MOF, UiO-66-NH2, and birnessite-type manganese dioxide, namely, δ-MnO2, where the nanosheets of δ-MnO2 are vertically aligned and densely grown on the crystal surfaces of UiO-66-NH2. The δ-MnO2/UiO-66-NH2 composite could completely remove low-concentration O3 (5 ppm) in both dry and highly humid (RH = 80%) air at ambient temperature and pressure with a space velocity of 2000 L h–1 g–1. In contrast, a single-phase sample of δ-MnO2 or the typical O3 decomposition catalyst, α-MnO2, showed a much lower O3 removal efficiency under the same experimental conditions. Due to the ultrathin morphology (high surface area) and well-separated distribution (no aggregation) of δ-MnO2 nanosheets in the δ-MnO2/UiO-66-NH2 composite, there are rich Mn2+/Mn3+ atoms and oxygen vacancies on its surface, contributing to its high performance in catalytic O3 decomposition. This work demonstrated a facile method to prepare MOF-based composites with fascinating nanostructures and high catalytic activity in O3 decomposition, which are also potentially useful in other catalytic reactions.

materials science, multidisciplinary,nanoscience & nanotechnology
Morphological impact of 1-dimensional → 3-dimensional manganese dioxides on ozone catalytic decomposition correlated with crystal facet and lattice oxygen mobility

Haotian Wu,Runduo Zhang,Bin Kang,Xiaonan Guo,Zhaoying Di,Kun Wang,Jingbo Jia,Ying Wei,Zhou-Jun Wang

DOI: https://doi.org/10.1039/d4en00857j

2024-11-06

Environmental Science Nano

Abstract:Ozone is a pollutant that has received widespread attention in recent years, and manganese dioxide (MnO 2 ) has been widely used for ozone catalytic decomposition. However, few studies have described the structural-activity correlation of different types morphological of MnO 2 . In this study, series of MnO 2 crystals (α-, β-, γ-, δ-, ε-and λ-MnO 2 ) were synthesized, and their catalytic activities on ozone decomposition (25 o C, dry air) were comparatively studied, which exhibited an order of ε-MnO 2 > α-MnO 2 > γ-MnO 2 > β-MnO 2 ≈ δ-MnO 2 > λ-MnO 2 . XRD and HRTEM confirmed their diversities on the exposed crystal planes. It was confirmed that ε-MnO 2 with (1 0 2) plane has the largest number of oxygen vacancies and the best oxygen mobility. These findings elucidate the favorable performance of ε-MnO 2 in the aforementioned tests. DFT calculations reveal the reaction mechanism, showed that ε-MnO 2 has the lowest energy barrier for the decisive speed step O 2 2- desorption (2.04 eV). This work illustrated the crucial role of the oxygen vacancies and the mobility of lattice oxygen, which sheds light on the strategies of rational design and control synthesis of effective catalysts for ozone elimination.

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
Engineering of Mn3O4@Ag Microsphere Assembled by Nanosheets for Superior O3 Decomposition

Yu Xie,Jiandian Wang,Zihao Zhou,Ying Wu,Gao Cheng,Yongfeng Li,Changyong Sun,Ming Sun,Lin Yu

DOI: https://doi.org/10.1039/d2dt02711a

IF: 4

2022-10-11

Dalton Transactions

Abstract:Manganese oxides have wide application in ambient decomposition of ozone, and their activities are affected by many parameters. Morphology engineering and metal doping are one of the effective methods to enhance the catalytic activity for O3 decomposition. Herein, a topochemical transformation route to Mn3O4 nanosphere composed of 2D nanosheets is first provided using layered β-MnOOH as the precursor. Then nano silver particles are deposited over the Mn3O4 nanosheets via redox reaction without any extra reducing agent. In comparison with the Mn3O4 with a conventional octahedral morphology, the prepared Mn3O4 nanosphere (Mn3O4-NF) and its Ag-doped heritage, Mn3O4@Ag (Mn3O4@Ag-NF), both retain the morphology of β-MnOOH, display better reducibility and higher oxygen vacancies. The best catalytic performance for O3 decomposition is found over Mn3O4@Ag-NF, which exhibits ∼88.5% of removal efficiency within 24 h under a space velocity of 600 L g-1 h-1 and a relative humidity of 50% at room temperature. This work emphasizes the advantage of nanosheet morphology and metal doping in optimizing the catalytic activity for O3 elimination of manganese oxide.

chemistry, inorganic & nuclear
Facile Synthesis Of Amorphous Mesoporous Manganese Oxides For Efficient Catalytic Decomposition Of Ozone

Haibao Huang,Jian Ji,Shuilian Liu,Yi Yu,Lyumeng Ye

DOI: https://doi.org/10.1039/c8cy01111g

IF: 6.177

2019-01-01

Catalysis Science & Technology

Abstract:Amorphous mesoporous manganese oxides (MnOx) with different microstructures were synthesized via a facile redox method between manganese acetate and potassium permanganate by modulating the addition sequence of the precursors and directly used for catalytic decomposition of ozone. The as-prepared catalysts were characterized by N-2 physisorption, SEM, TEM, XRD, Raman, H-2-TPR, O-2-TPD, TGA, and XPS. Amorphous mesoporous MnOx had more surface oxygen vacancies and larger specific surface area than calcined MnOx with high crystallinity and exhibited superior ozone decomposition activity at room temperature. Kinetic study and characterization results revealed that the lower oxidation state of Mn resulting from mixed Mn2+, Mn3+ and Mn4+ in amorphous mesoporous MnOx was more favorable for activating ozone towards high initial ozone conversion. Moreover, the catalytic stability of amorphous mesoporous MnOx strongly depended on the relative humidity, and the elevation of the oxidation state and the accumulation of surface adsorbed water molecules possibly led to the catalyst deactivation. These results may shed new light on the design of novel amorphous manganese-based catalysts for ozone decomposition.
Oxygen vacancy-mediated Mn2O3 catalyst with high efficiency and stability for toluene oxidation

Xueqin Yang,Ziqing Ma,Dadao Wang,Xiaolin Yu,Xiuhong Zhu,Ting Wang,Yuan Yuan,Yucong Guo,Bo Shi,Maofa Ge,Guangxin Ru

DOI: https://doi.org/10.1016/j.jcis.2024.07.066

2024-07-08

Abstract:Oxygen vacancy engineering in transition metal oxides is an effective strategy for improving catalytic performance. Herein, defect-enriched Mn2O3 catalysts were constructed by controlling the calcination temperature. The high content of oxygen vacancies and accompanying Mn4+ ions were generated in Mn2O3 catalysts calcined at low temperature, which could greatly improve the low-temperature reducibility and migration of surface oxygen species. DFT theoretical calculations further confirmed that molecular oxygen and toluene were easily adsorbed over defective α-Mn2O3 (222) facets with an energy of -0.29 and -0.48 eV, respectively, and corresponding OO bond length is stretched to 1.43 Å, resulting in the highly reactive oxygen species. Mn2O3-300 catalyst with abundant oxygen vacancies exhibited the highest specific reaction rate and lowest activation energy. Furthermore, the optimized catalyst possessed the outstanding stability, water tolerance and CO2 yield. In comparison with the fresh Mn2O3-300 catalyst, the physical structure and surface property of the used catalyst remained almost unchanged regardless of whether undergoing the stability test at consecutive catalytic runs as well as high temperature, and water resistance test. In situ DRIFTS spectra further elucidated that introducing the water vapor had little effect on the reaction intermediates, indicating the excellent durability of the defect-enriched catalyst.
Selective ozone catalyzation modulated by surface and bulk oxygen vacancies over MnO2 for superior water purification

Liying Wu,Zonglin Wang,Jiaye Liu,Caihong Liu,Xueyan Li,Yixuan Zhang,Wei Wang,Jun Ma,Zhiqiang Sun

DOI: https://doi.org/10.1016/j.apcatb.2023.123526

2024-04-01

Abstract:The regulation behavior of oxygen vacancies (Vo) at different spatial positions (surface or bulk) in catalysts for selective O3 catalyzation, along with the reaction pathways evolution was well-investigated in α-MnO2−x/O3 systems. Combined characterization methods, systematic organic removal experiments, structure-activity relationship analysis, and theoretical calculations were employed to unveil O3 decomposition and electron transfer behaviors regulated by surface or bulk Vo. The contribution of electron transfer process (ETP) to atrazine (ATZ) removal was reinforced from 5.2 % to 34.8 % with the formation of bulk Vo, and Vo-rich α-MnO2−x-2/O3 system achieved ∼96.5 % ATZ removal along with improved TOC mineralization (∼38 % vs. ∼20 %). Surface Vo facilitated O3 adsorption, promoting its decomposition into •OH, while bulk Vo not only accelerated •OH production but also withdrew electrons from organics to build ETP. This study shed light on precise modification of metal-based catalysts with Vo to modulate •OH/ETP synergistic processes in catalytic ozonation for efficient water purification.

chemistry, physical,engineering, chemical, environmental

Regulating Oxygen Vacancies in Ultrathin Δ-Mno2 Nanosheets with Superior Activity for Gaseous Ozone Decomposition

Oxygen vacancy modulation of two-dimensional γ-Ga2O3 nanosheets as efficient catalysts for photocatalytic hydrogen evolution

Surface Oxygen Vacancy Induced Α-Mno2 Nanofiber for Highly Efficient Ozone Elimination

To Promote Ozone Catalytic Decomposition by Fabricating Manganese Vacancies in ε-MnO2 Catalyst via Selective Dissolution of Mn-Li Precursors

Space-confined manganese oxides nanosheets for efficient catalytic decomposition of ozone

Unlocking efficient and robust ozone decomposition with CNT-confined manganese oxide via synergistic electronic modulation

Insights into the Reactive and Deactivation Mechanisms of Manganese Oxides for Ozone Elimination: The Roles of Surface Oxygen Species

Tuning the K+ Concentration in the Tunnels of Α-Mno2 to Increase the Content of Oxygen Vacancy for Ozone Elimination.

Encapsulate α-MnO2 nanofiber within graphene layer to tune surface electronic structure for efficient ozone decomposition

Thermal Annealing Induced Surface Oxygen Vacancy Clusters in α-MnO2 Nanowires for Catalytic Ozonation of VOCs at Ambient Temperature.

Porous manganese oxides synthesized with natural products at room temperature: a superior humidity-tolerant catalyst for ozone decomposition

Catalytic Decomposition of Gaseous Ozone over Manganese Dioxides with Different Crystal Structures

Oxygen vacancy induced MnO 2 catalysts for efficient toluene catalytic oxidation

Unravelling the efficient catalytic performance of ozone decomposition over nitrogen-doped manganese oxide catalysts under high humidity

Oxygen Vacancy Rich Δ-Mno2 Nanosheets Encapsulating Single Cobalt Atoms-Anchored Carbon Nanotubes for Efficient Oxygen Evolution

Birnessite-Type Manganese Dioxide Nanosheets on Metal–Organic Frameworks with High Catalytic Activity in Ozone Decomposition

Morphological impact of 1-dimensional → 3-dimensional manganese dioxides on ozone catalytic decomposition correlated with crystal facet and lattice oxygen mobility

Engineering of Mn3O4@Ag Microsphere Assembled by Nanosheets for Superior O3 Decomposition

Facile Synthesis Of Amorphous Mesoporous Manganese Oxides For Efficient Catalytic Decomposition Of Ozone

Oxygen vacancy-mediated Mn2O3 catalyst with high efficiency and stability for toluene oxidation

Selective ozone catalyzation modulated by surface and bulk oxygen vacancies over MnO2 for superior water purification