Abstract:This paper describes a new linear matching method (LMM) technique for the direct evaluation of the ratchet limit of a structure subjected to a general cyclic load condition, which can be decomposed into cyclic and constant components. The cyclic load history considered in this paper contains multiload extremes to include most complicated practical applications. The numerical procedure uses the LMM state-of-the-art numerical technique to obtain a stable cyclic state of component, followed by a LMM shakedown analysis, to calculate the maximum constant load, i.e., the ratchet limit, which indicates the load carrying capacity of the structure subjected to a cyclic load condition to withstand an additional constant load. This approach is particularly useful in conjunction with the evaluation of the stable cyclic response, which produces the cyclic stresses, residual stresses, and plastic strain ranges for the low cycle fatigue assessment. A benchmark example of a holed plate under the combined action of cyclic thermal load and constant mechanical load is presented to verify the applicability of the new ratchet limit method through a comparison with published results by a simplified method assuming a cyclic load with two extremes. To demonstrate the efficiency and effectiveness of the method for a complicated cyclic load condition with multiload extremes, a composite thick cylinder with a radial opening subjected to cyclic thermal loads and a constant internal pressure is analyzed using the proposed ratchet limit method. Further verification by the ABAQUS step-by-step inelastic analysis demonstrates that the proposed new method provides a general-purpose technique for the evaluation of the ratchet limit and has both the advantages of programming methods and the capacity to be implemented easily within a commercial finite element code Abaqus.

Limit Load, Shakedown and Ratchet Analysis of Pressurized Lateral Nozzle

Shakedown Analysis of Pressure Pipeline with an Oblique Nozzle at Elevated Temperatures Using the Linear Matching Method

Ratcheting Behavior of Pressurized Lateral Nozzle of Cylinder with Local Wall Thinning under Different Loading Paths

Performances Analysis of Asymmetric Minimum Length Nozzles

Verification of the Linear Matching Method for Limit and Shakedown Analysis by Comparison with Experiments

On Shakedown, Ratchet and Limit Analyses of Defective Pipeline

Shakedown, Ratchet, and Limit Analyses of 90° Back-to-back Pipe Bends under Cyclic In-Plane Opening Bending and Steady Internal Pressure

Limit, Shakedown and Ratchet Analyses of Defective Pipeline under Internal Pressure and Cyclic Thermal Loading

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels

Shakedown Analysis of a Torispherical Head with a Piping Nozzle under Combined Loads by the Stress Compensation Method

Shakedown Limit of Elbow Pipe under Coupled Cyclic Thermal-Mechanical Loading Based on the LMM

Numerical Study on the Effect of a Lobed Nozzle on the Flow Characteristics of Submerged Exhaust

Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading

Shakedown and limit analyses for 3-D structures using the linear matching method

CASE STUDY OF SHAKEDOWN EVALUATION OF A SHELL WITH NOZZLE BASED ON ELASTIC-PLASTIC ANALYSIS

Test Research on Limit Load of Spherical Vessel with Elliptical Nozzle

Comparison of the Linear Matching Method to Rolls-Royce's Hierarchical Finite Element Framework for ratchet limit analysis

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

A Direct Approach to the Evaluation of Structural Shakedown Limit Considering Limited Kinematic Hardening and Non-Isothermal Effect

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

A Direct Method on the Evaluation of Ratchet Limit