Abstract:Back-to-back pipe bends are widely adopted applications in many industries including nuclear sectors. Evaluation of their load bearing capability under complex cyclic loading is very important. Recently, a couple of research reported shakedown boundary of a 90° back-to-back pipe bends by adopting a conservative approach but no comprehensive post yield structural behaviors have been dealt with. In this research the concerning pipe bends subjected to cyclic opening in-plane (IP)/out-of-plane (OP) bending and steady internal pressures are analyzed to construct shakedown and ratchet limit boundary by means of the Linear Matching Method. Analyzed results present that the concerning pipe bends under out-of-plane bending has higher resistance to cyclic bending than under in-plane bending. In additions, the out-of-plane bending causes very small alternating plasticity areas, unlike the in-plane bending. Full cyclic incremental analyses known as step-by-step analysis are performed to verify the structural responses either side of each boundary and confirm correct responses. Parametric studies are carried out with respect to changes in geometry of the concerning pipe bends subjected to the same loading, and semi-empirical equations are derived from relationships of the reverse plasticity limit and the limit pressure with the bend characteristic. This paper offers broad understandings of structural responses of the 90° back-to-back pipe bends under the complex cyclic loading as well as providing key points to be considered for the life assessment of the piping system.

Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading

Shakedown, Ratchet, and Limit Analyses of 90° Back-to-back Pipe Bends under Cyclic In-Plane Opening Bending and Steady Internal Pressure

Shakedown Limit of Elbow Pipe under Coupled Cyclic Thermal-Mechanical Loading Based on the LMM

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

On the Shakedown Analysis of Welded Pipes

SHAKEDOWN AND LIMIT ANALYSIS OF KINEMATIC HARDENING PIPING ELBOWS UNDER INNER PRESSURE AND BENDING MOMENTS

Comprehensive Numerical Study on Shakedown and Ratchetting Behaviours of a Deteriorated 90° Back-to-back Pipe Bends

Cyclic Plasticity Behavior of 90° Back-to-Back Pipe Bends under Cyclic Bending and Steady Pressure

A Direct Approach to the Evaluation of Structural Shakedown Limit Considering Limited Kinematic Hardening and Non-Isothermal Effect

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Chen, Weihang and Chen, Haofeng and Li, Tianbai and Ure, James Michael (2011) Limit, shakedown and ratchet analyses of defective pipeline under internal pressure and cyclic thermal loading. In: ASME Pressure Vessels

Investigating the Effects of Cyclic Thermo-Mechanical Loading on Cyclic Plastic Behavior of a Ninety-Degree Back-to-Back Pipe Bend System

Shakedown Analysis of Modified Bree Problems Involving Thermal Membrane Stress and Generalized Loading Conditions

Shakedown Analysis of Pressure Pipeline with an Oblique Nozzle at Elevated Temperatures Using the Linear Matching Method

On Shakedown, Ratchet and Limit Analyses of Defective Pipeline

Shakedown and Creep Rupture Assessment of A Header Branch Pipe Using the Linear Matching Method

Limit, Shakedown and Ratchet Analyses of Defective Pipeline under Internal Pressure and Cyclic Thermal Loading

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Shakedown and limit analyses for 3-D structures using the linear matching method

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Ratcheting Limit Assessment of Straight Pipes Subjected to Combinedinternal Pressure and Reversed Bending Moments.pdf