Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

On the Shakedown Analysis of Welded Pipes

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Safety Test Research of Pressure Pipes Containing Incomplete Welding Defects

Design and Analysis of a Novel Ship Pipeline Welding Auxiliary Device

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

SHAKEDOWN AND LIMIT ANALYSIS OF KINEMATIC HARDENING PIPING ELBOWS UNDER INNER PRESSURE AND BENDING MOMENTS

Limit and Shakedown Analysis under Hydrogen Embrittlement Condition

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

A Direct Approach to the Evaluation of Structural Shakedown Limit Considering Limited Kinematic Hardening and Non-Isothermal Effect

Safety analysis of pressure piping containing incomplete penetration under combined loads

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Shakedown Analysis of a Torispherical Head with a Piping Nozzle under Combined Loads by the Stress Compensation Method

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Numerical Analysis of Welding in Fillet Weld for High-Pressure Pipeline In-Service

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Thermal-Mechanical Fatigue Behavior of P92 T-Piece Pipe

Shakedown and Limit Analysis of Defective Pressure Vessels

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

Inhomogeneous Strain Behaviors of the High Strength Pipeline Girth Weld under Longitudinal Loading