Abstract:An autofrettage analysis of an internally pressurized thick-walled spherical shell is performed by using two closed-form solutions for an elastic linear-hardening shell and an elastic power-law hardening shell based on a strain gradient plasticity theory, which contains a microstructure-dependent length-scale parameter and can capture size effects observed at the micron scale. The analysis leads to the analytical determination of the elastic and plastic limiting pressures, the residual stress field, and the stress field induced by an operating pressure for each strain-hardening spherical shell. This is followed by a shakedown analysis of the autofrettaged thick-walled spherical shells, which results in analytical formulas for reverse yielding and elastic reloading shakedown limits. The newly obtained formulas include their classical plasticity-based counterparts as special cases. To quantitatively illustrate the new formulas derived, a parametric study is conducted. The numerical results reveal that the shakedown limit (as the upper bound of the autofrettage pressure) increases with the increase of the strain-hardening level. In addition, it is observed that the shakedown limit based on the strain gradient plasticity solution increases with the decrease of the inner radius when the shell inner radius is sufficiently small, but it approaches that (a constant value independent of the inner radius) based on the classical plasticity solution when the inner radius becomes large. This predicted size (strengthening) effect at the micron scale by the newly obtained formulas agrees with the general trends observed experimentally.

CASE STUDY OF SHAKEDOWN EVALUATION OF A SHELL WITH NOZZLE BASED ON ELASTIC-PLASTIC ANALYSIS

Shakedown Analysis of a Torispherical Head with a Piping Nozzle under Combined Loads by the Stress Compensation Method

Investigation on Plastic Instability of a Thin-Walled Anisotropic Cylindrical Shell Subjected to Internal Impulsive Loading

Shakedown Analysis of Pressure Pipeline with an Oblique Nozzle at Elevated Temperatures Using the Linear Matching Method

A COMPUTATIONAL APPROACH TO KINEMATIC SHAKEDOWN ANALYSIS OF ELASTIC-PLASTIC STRUCTURES AND ITS APPLICATIONS

Shakedown Analysis of Thick-Walled Cylinders Subjected to Internal Pressure with the Unified Strength Criterion

A MESHLESS LOCAL PETROV-GALERKIN METHOD FOR STATIC SHAKEDOWN ANALYSIS OF ELASTO-PLASTIC STRUCTURES

Advances in Shakedown Design Methods for Pressure Vessels and Piping

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Shakedown analysis of engineering structures under multiple variable mechanical and thermal loads using the stress compensation method

Autofrettage and Shakedown Analyses of an Internally Pressurized Thick-Walled Spherical Shell Based on Two Strain Gradient Plasticity Solutions

Shakedown Analysis of Elastic-Plastic Structures Considering the Effect of Temperature on Yield Strength: Theory, Method and Applications

On Shakedown of Three-Dimensional Elastoplastic Strain-Hardening Structures

Shakedown Analysis of Modified Bree Problems Involving Thermal Membrane Stress and Generalized Loading Conditions

Limit Load, Shakedown and Ratchet Analysis of Pressurized Lateral Nozzle

Shakedown Analysis of Thick Spherical Shell of Material with Different Strength in Tension and Compression

Finite-Element Analysis Of Shakedown Of Axisymmetrical Shells

Lower-bound shakedown analysis of spherical shells containing defects

A numerical approach for predicting shakedown limit in ratcheting behavior of materials

SHAKEDOWN AND LIMIT ANALYSIS OF KINEMATIC HARDENING PIPING ELBOWS UNDER INNER PRESSURE AND BENDING MOMENTS

Shakedown of Thick Cylinders with Radial Openings under Thermomechanical Loadings