Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Lower-bound shakedown analysis of spherical shells containing defects

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Shakedown and Limit Analysis of Defective Pressure Vessels

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Finite-Element Analysis Of Shakedown Of Axisymmetrical Shells

Shakedown Analysis of Thick Spherical Shell of Material with Different Strength in Tension and Compression

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Lower bound shakedown analysis by the symmetric Galerkin boundary element method

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Shakedown Analysis of a Torispherical Head with a Piping Nozzle under Combined Loads by the Stress Compensation Method

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Limit and Shakedown Analysis under Hydrogen Embrittlement Condition

Autofrettage and Shakedown Analyses of an Internally Pressurized Thick-Walled Spherical Shell Based on Two Strain Gradient Plasticity Solutions

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Lower bound shakedown analysis by using the element free Galerkin method and non-linear programming

Shakedown Analysis of Thick-Walled Cylinders Subjected to Internal Pressure with the Unified Strength Criterion

Lower-bound Shakedown Analysis for Bounded Kinematic Hardening Structures by Using the Element Free Galerkin Method with Orthogonal Basis

A Solution Procedure for Lower Bound Limit and Shakedown Analysis by Sgbem

Shakedown Analysis of Modified Bree Problems Involving Thermal Membrane Stress and Generalized Loading Conditions