Abstract:The use of Bi0.5Na0.5TiO3 (BNT)-based materials is largely limited by their inherent thermal depolarization where the piezoelectric properties decreases remarkably. It is intractable to simultaneously realize high piezoelectric properties and reliable thermal stability over the required operating range in BNT-based systems. Here, we demonstrated an alternative design method to commonly applied chemical doping or substituting to tailor the functional properties, by judiciously forming 0-3 type composites of ferroelectric 0.83(Bi0.5Na0.5)TiO3-0.17(Ri(0.5)K(0.5))TiO3 with semiconductor ZnO inclusions (BNT-BKT:ZnO) to balance the aforementioned paradox. In BNT-BKT:0.1ZnO composite, we achieved distinguished comprehensive performance: high thermal stability of piezoelectric coefficient d(33) (maintaining 73% of the initial value at 120 degrees C); good fatigue characteristic (deterioration of 8% up to 10(5) cycles in the field-induced strain); and relatively large room temperature d(33) of 109 pC/N. The mechanism for the enhanced fatigue behavior was mainly ascribed to the lower defect density arising from the lower oxygen vacancy concentration in composites as compared to pure BNT-BKT. Most interestingly, hardening of piezoelectric properties usually produced by doping with lower valence elements, was realized in composites, as characterized by nearly two-fold increase in mechanical quality factor (Q(m)) in comparison to BNT-BKT. Our research not only offers a feasible paradigm for tailoring functional properties of BNT-based materials though composite engineering, but also inspires further works to benefit a wide range of functionalities in other ferroelectric materials.

A Novel Approach to Improving the Electromechanical Properties of PZT-based Piezoelectric Ceramics Via a Grain Coating Modification Strategy

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

Enhanced mechanical properties and excellent electrical properties of PZT piezoelectric ceramics modified by YSZ

Significantly Toughened PZT-based Piezoelectric Ceramics Simultaneously Keeping Excellent Electrical Properties Via Incorporating Trace Amount of Yttria-Partially-stabilized Zirconia

Enhanced Temperature Stability and Tailored Electromechanical Response in (ba0.85ca0.15)(zr0.1ti0.9)o3 Piezoceramics Through Rare Earth Modification

PZT Based Piezoelectric Ceramics with Enhanced Fracture Toughness

Synergistic Design Strategy for Enhancing the Piezoelectric Performance of BiFeO3-Based High-Temperature Piezoelectric Ceramics

Enhanced Thermal Stability, Hardening of Piezoelectric Property, and Mediated Electromechanical Response in (Bi0.5na0.5)tio3-Based Piezoceramics Via Composite Approach

Lead zirconate titanate ceramics with aligned crystallite grains

Mechanical Reinforcement and Piezoelectric Properties of Pzt Ceramics Embedded with Nano-Crystalline

PZT-based piezoelectric ceramics with complex structures

Toughening of PZT Piezoelectric Ceramics by In-Situ Complex Structures

Mechanical and electrical properties of small amount of oxides reinforced PZT ceramics

Enhanced Piezoelectric Properties of PZT Ceramics Prepared by Direct Coagulation Casting Via High Valence Counterions (DCC–HVCI)

Synergetic Enhancement in the Piezoelectric Coefficient and Electromechanical Factor in PYN-PMN-PT Ceramics Via Texture Engineering

Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications.

Enhanced mechanical properties in Ag-particle-dispersed PZT piezoelectric composites for actuator applications

Realizing the invariant electrostrain response and low hysteresis via multicomponent coordination in Pb‐based ceramics

Enhanced Piezoelectric and Mechanical Properties of Zno Whiskers and Sb2o3 Co-Modified Lead Zirconate Titanate Composites

Enhancing the piezoelectric properties and thermal stability of PMN-PMS-PSZT high-power piezoelectric ceramics through defect engineering

Quantification of the physical, microstructural, thermal, and mechanical properties of PZT-reinforced Ti-based composites