Abstract:In this work, the influence of a small-molecule material, tris(8-hydroxyquinoline) aluminum (Alq(3)), on bulk heterojunction (BHJ) polymer solar cells (PSCs) is investigated in devices based on the blend of poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) and [6,6] phenyl-C(61) butyric acid,methyl ester (PCBM) By doping Alq(3) into MEH PPV PCBM solution, the number of MEH-PPV excitons can be effectively increased due to the energy transfer from Alq(3) to MEH-PPV, which probably induces the increase of photocurrent generated by excitons dissociation However, the low carrier mobility of Alq(3) is detrimental to the efficient charge transport, thereby blocking the charge collection by the respective electrodes The balance between photon absorption and charge transport in the active layer plays a key role in the performance of PSCs For the case of 5 wt % Alq(3) doping, the device performance is deteriorated rather than improved as compared with that of the undoped device On the other hand, we adopt Alq(3) as a buffer layer instead of commonly used LiF All the photovoltaic parameters are improved, yielding an 80% increase in power conversion efficiency (PCE) at the optimum thickness (1 nm) as compared with that of the device without any buffer layer Even for the 5 wt % Alq(3) doped device, the PCE has a slight enhancement compared with that of the standard device after modification with 1 nm (or 2 nm) thermally evaporated Alq(3) The performance deterioration of Alq(3) doped devices can be explained by the low solubility of Alq(3), which probably deteriorates the bicontinuous D-A network morphology, while the performance improvement of the devices with Alq(3) as a buffer layer is attributed to the increased light harvesting, as well as blocking the hole leakage from MEH-PPV to the aluminum (Al) electrode due to the lower highest occupied molecular orbital (HOMO) level of Alq(3) compared with that of MEH-PPV

Effect of CsF Interlayer on the Performance of Polymer Bulk Heterojunction Solar Cells

Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells

Influence of the Thickness and Cathode Material on the Performance of the Polymer Solar Cell

Performance and lifetime improvement of polymer/fullerene blend photovoltaic cells with a C60 interlayer

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Cesium carbonate as a functional interlayer for polymer photovoltaic devices

Enhancement of short current density in polymer solar cells with phthalocyanine tin (IV) dichloride as interfacial layer

Fullerene Derivative Layer Induced Phase Separation and Charge Transport Improvement for Inverted Polymer Solar Cells

Enhanced Efficiency Of Polymer: Fullerene Bulk Heterojunction Solar Cells With The Insertion Of Thin Tio2

Solvent Effect Leading to High Performance of Bulk Heterojunction Polymer Solar Cells by Novel Polysilafluorene Derivatives

Influence of Small-Molecule Material on Performance of Polymer Solar Cells Based on MEH-PPV:PCBM Blend

High-Efficiency Polymer Solar Cells with Sm/Ca Bilayer Cathode Buffers

5-Nm LiF As an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer

Enhanced efficiency of polymer: Fullerene bulk heterojunction solar cells with the insertion of thin TiO2 layer near the LiF/Al electrode

Influence of the Active Layer Thickness on the Performance of Bulk Heterojunction Solar Cell

Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether As an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction.

Efficiency Enhancement for Bulk Heterojunction Photovoltaic Cells Via Incorporation of Alcohol Soluble Conjugated Polymer Interlayer

Water- and Alcohol-Soluble Cationic Phenanthroline Derivatives As Efficient Cathode Interfacial Layers for Bulk-Heterojunction Polymer Solar Cells

Efficiency Enhancement of Polymer Solar Cells by Applying an Alcohol-Soluble Fullerene Aminoethanol Derivative As A Cathode Buffer Layer

The Dependence of the Cathode Architecture on the Photoactive Layer Morphology in Bulk-Heterojunction Polymeric Solar Cells

Performance Enhancement in Inverted Polymer Solar Cells Incorporating Ultrathin Au and LiF Modified ZnO Electron Transporting Interlayer