Abstract:Conductive ionenes were synthesized by integrating the electron donor dialkoxynaphthalene (DAN) with the electron acceptor naphthalene diimide (NDI) using the Menshutkin reaction. The crystallinity and morphology of the films of these polymers can be optimized by varying the DAN-to-NDI ratio. These ionenes show strong charge transfer from DAN to NDI, though absent conjugated backbones, affording self-doping polymers with enhanced π–π interactions and excellent electronic properties. This is the first example where an electron donor can dope the electron acceptor in nonconjugated polymers, opening a new avenue for designing efficient interlayer materials. These ionenes markedly modify the electrode interface and promote efficient interfacial self-doping to boost the performance of fullerene-based, non-fullerene-based, and ternary organic solar cells, affording high power conversion efficiencies over a wide range of interlayer thicknesses, from ∼8 to ∼40 nm, with a maximum efficiency of 17.05%.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c07493?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c07493</a>.Interfacial dipole interaction at the Ag electrode/ionene polymer interface; normalized UV–vis absorption spectra of P1 and P2 films; UV–vis spectra of DAN-Br and NDI-N solutions in chloroform; solution colors of samples; EPR spectra of P1 and P2 in solid state; J–V curves of electron-only devices employing P1 or P2; 2D-GIXD patterns of P1 and P2; photovoltaic metrics of devices; schematic energy-level diagrams of PEDOT:PSS, PTB7, PC71BM, PM6, Y6, P1, and P2; summarized photovoltaic performance of devices (PTB7:PC71BM) with P1 and P2 interlayers; and photovoltaic metrics of the best-performing devices (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07493/suppl_file/am1c07493_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells.

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Self N-Doped [6,6]-Phenyl-c61-butyric Acid 2-((2-(trimethylammonium)ethyl)-(dimethyl)ammonium)ethyl Ester Diiodides As A Cathode Interlayer for Inverted Polymer Solar Cells

Efficiency Enhancement for Bulk Heterojunction Photovoltaic Cells Via Incorporation of Alcohol Soluble Conjugated Polymer Interlayer

Self-Organized Fullerene Interfacial Layer for Efficient and Low-Temperature Processed Planar Perovskite Solar Cells with High Uv-Light Stability

New self-doping alcohol-soluble polymer PDBND-FN as cathode interface layer enables efficient organic solar cells

Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell.

Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells

Conductive Ionenes Promote Interfacial Self-Doping for Efficient Organic Solar Cells

Melamine-Doped Cathode Interlayer Enables High-Efficiency Organic Solar Cells

Unfused Electronic Acceptor-Based Polymers as Interfacial Materials for Efficient Inverted Perovskite Solar Cells

Conductive Water/Alcohol-Soluble Neutral Fullerene Derivative As an Interfacial Layer for Inverted Polymer Solar Cells with High Efficiency

Multifunctional Hybrid Interfacial Layers for High‐Performance Inverted Perovskite Solar Cells

Synergistic optimization of interfacial energy-level alignment and defect passivation toward efficient annealing-free inverted polymer solar cells

Interfacial engineering of self-assembled monolayer modified semi-roll-to-roll planar heterojunction perovskite solar cells on flexible substrates

Electric Field-Assisted Self-Organization of Polymer:Fullerene Hybrids on the Photovoltaic Performance

Efficient and Stable Organic Solar Cells Enabled by Backbone Engineering of Nonconjugated Polymer Zwitterion Interlayers

Vertical phase separation in bulk heterojunction solar cells formed by in situ polymerization of fulleride

Minimizing Interfacial Energy Loss and Volatilization of Formamidinium via Polymer‐Assisted D–A supramolecular Self‐Assembly Interface for Inverted Perovskite Solar Cells with 25.78% Efficiency

Designing Thickness-Insensitive Cathode Interlayers via Constructing Noncovalently Conformational Locks for Highly Efficient Non-fullerene Organic Solar Cells

Engineering of Electron Extraction and Defect Passivation Via Anion-Doped Conductive Fullerene Derivatives As Interlayers for Efficient Invert Perovskite Solar Cells.