Abstract:Three benzotriazole (BTA)-based conjugated polymers PF-DTBTA, PCz-DTBTA, and PPh-DTBTA, with electron-donating segments of fluorene, carbazole, and dialkoxybenzene, respectively, were successfully synthesized as new polymeric donors in bulk-heterojunction (BHJ) photovoltaic cells (PVCs). All the copolymers exhibited good solubility in common organic solvents and good thermal stability. The optical band gaps for PF-DTBTA, PCz-DTBTA, and PPh-DTBTA are 2.24, 2.18, and 1.87 eV, respectively. The HOMO levels for PF-DTBTA, PCz-DTBTA, and PPh-DTBTA are −5.67, −5.54, and −5.20 eV, respectively, which were determined by the electron-donating segments. The LUMO levels for PF-DTBTA, PCz-DTBTA, and PPh-DTBTA are −3.43, −3.36, and −3.33 eV, respectively, which were mainly dominated by the BTA unit. For a blend ratio of polymer:PCBM = 1:2, BHJ PVCs with Al cathode displayed power conversion efficiencies (PCE) of 0.9%, 1.51%, and 1.16% for PF-DTBTA, PCz-DTBTA, and PPh-DTBTA, respectively. Alcohol-soluble poly[(9,9-dioctyl-2,7-fluorene)-alt-(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)] (PFN) was selected for cathode modification. For BHJ PVCs with PF-DTBTA and PCz-DTBTA as the donors, open-circuit voltages (V oc) of the PVCs could all be elevated with the PFN/Al bilayer cathode, whereas no such improvements were found for PVCs with PPh-DTBTA as the donor. The behaviors could be attributed to the different V oc losses when using Al cathode. Using PFN/Al bilayer cathode could also improve short-curcuit current and fill factor for the three BTA-based copolymers. The N−N interactions between the BTA-based polymers and the PFN may modify interfacial contact, resulting in enhancement of the electron extraction from the acceptor phase to the cathode and decreasing hole−electron recombination in the active layer. Consequently, PFN/Al bilayer cathode elevated PCE values to 1.3%, 2.75%, and 1.39% for PF-DTBTA, PCz-DTBTA, and PPh-DTBTA, respectively. The most significant increasing of PCE with a calculated value of 80% was found for PCz-DTBTA as the donor, and this might be related to the additional N−N interactions between the carbazole segments and the PFN. The results would supply useful information to understand the contribution of an interfacial layer on the photovoltaic performance. Our results also suggest that the bilayer cathode would have great potential to elevate PCE of BHJ PVCs.

Bulk heterojunction solar cells based on two kinds of organic polymers and fullerene derivative

All-Conjugated Poly(3-Alkylthiophene) Diblock Copolymer-Based Bulk Heterojunction Solar Cells With Controlled Molecular Organization And Nanoscale Morphology

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Modeling of the photophysical and photovoltaic properties of an active layer based on the organic composite poly(2‐methoxy‐5‐(2‐ethyl‐hexyloxy)‐1,4‐phenylene‐vinylene) (MEH‐PPV)–poly(3‐hexylthiophene) (P3HT): (6,6)‐phenyl C61 butyric acid methyl ester (PCBM)

Small-bandgap polymer photovoltaic devices

Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High‐Performance Nonfullerene Polymer Solar Cells

Bulk Heterojunction Perovskite Solar Cells Incorporated with Conjugated Polyfluorenes

Efficiency Enhancement for Bulk Heterojunction Photovoltaic Cells Via Incorporation of Alcohol Soluble Conjugated Polymer Interlayer

Bulk-Heterojunction Solar Cells with Benzotriazole-Based Copolymers as Electron Donors: Largely Improved Photovoltaic Parameters by Using PFN/Al Bilayer Cathode

Efficient bulk heterojunction solar cells based on solution processed small molecules based on the same benzo[1,2-b:4, 5-b']thiophene unit as core donor and different terminal units.

Bulk Heterojunction or Layer‐by‐Layer Structure PM6:L8‐BO Based Polymer Solar Cells Exhibiting an Efficiency of 17.84 % or 18.43 %

Bulk heterojunction perovskite solar cells incorporated with p-type low optical gap conjugated polymers

Numerical studies of P3HT : PCBM organic solar cell with an additional polymer layer using drift diffusion model

Polymer Solar Cells with an Inverted Device Configuration Using Polyhedral Oligomeric Silsesquioxane-[60]Fullerene Dyad As a Novel Electron Acceptor

Methanofullerene Elongated Nanostructure Formation for Enhanced Organic Solar Cells

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr3 Perovskite Solar Cells

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr 3 Perovskite Solar Cells

Enhanced open-circuit voltage of two side chain conjugated polythiophene derivatives blended with indene-C60 bisadduct

Optimized optical and morphological properties of thin MEH-PPV: PC71BM films deposited on glass substrates for photovoltaic applications

Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7%

Synthesis, Characterization and Photovoltaic Properties of Poly{[1′,4′-Bis-(thienyl-vinyl)]-2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene-vinylene}