Abstract:Cathode buffer layer (CBL) is one of the key issues influencing the performance of organic solar cells. In this article, a nanocomposite of zinc oxide nanoparticles (ZnO) together with a conjugated polymer, poly[(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl)-fluorene] (PFN) was developed, and used as the CBL for solution processed inverted organic solar cells (OSC). In comparison with the bare ZnO, PFN or ZnO/PFN stacked layer, the ZnO:PFN nanocomposite CBL employing device showed superior device performance, in particular significantly improved fill factor. Optimized power conversion efficiency (PCE) of P3HT:PC61BM and PTB7:PC61BM device using ZnO:PFN composite CBLs reached to 3.56% and 7.17%, respectively. Influences of the mixing ratio and the layer thickness of the ZnO:PFN nanocomposite CBL on solar cell performance were carefully studied, and results indicated that ZnO:PFN CBL showed a wide tolerance of blend ratio and layer thickness. In particular, no obvious thickness dependent-device performance was found, even when the CBL layer thickness was higher than 125nm, providing a good printing processibility of the nanocomposite. Photoelectron spectroscopy, photoluminescence, as well as electric conductivity of the ZnO:PFN films were studied, and the results were compared with that of the other three reference CBLs. Results demonstrated that the interaction between ZnO and PFN decreases the work function of the blended film, leading to a more favorable energy level alignment for electron injection at the interface. Analysis on the dark J–V curves of the solar cells revealed that device using ZnO:PFN CBL had the best diode characteristics including lowest reverse saturated current density (J0), ideal factor (n), and series resistance (Rs), and highest shunt resistance (Rsh). Such an improvement was ascribed to the defect passivation by the conjugated polymer, which led to an improved charge carrier selectivity of the CBL and consequently enhanced the FF of the solar cells. In addition, long-term stability of organic solar cells was also improved by using ZnO:PFN nanocomposite as the CBL. The current work provides a valuable guideline for the development of high performance cathode buffer layer material for printable organic solar cells.

Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells

[6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells

Effect of CsF Interlayer on the Performance of Polymer Bulk Heterojunction Solar Cells

Improving the Stabilities of Organic Solar Cells Via Employing a Mixed Cathode Buffer Layer

Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Effect of 8-hydroxyquinolatolithium buffer layer on the performance of polymer photovoltaic cells

Cesium carbonate as a functional interlayer for polymer photovoltaic devices

Effect of buffer layers on the performance of organic photovoltaic cells based on copper phthalocyanine and C60

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

5-Nm LiF As an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer

Effects of Cathode Modification Using Spin-Coated Lithium Acetate on the Performances of Polymer Bulk-Heterojunction Solar Cells

Application of Buffer Layer to Improve the Efficiency of Organic Solar Cells

Effect of CsF Buffer Layer on Charge-Carrier Mobility in Organic Light-Emitting Diodes Based on a Polyfluorene Copolymers by Admittance Spectroscopy

Research Progress of Buffer Layer and Encapsulation Layer Prepared by Atomic Layer Deposition to Improve the Stability of Perovskite Solar Cells

A Versatile Buffer Layer for Polymer Solar Cells: Rendering Surface Potential by Regulating Dipole

Zinc Oxide: Conjugated Polymer Nanocomposite As Cathode Buffer Layer for Solution Processed Inverted Organic Solar Cells

In Situ Cesium Modification at Interface Enhances the Stability of Perovskite Solar Cells

Efficiency Enhancement of Polymer Solar Cells by Applying an Alcohol-Soluble Fullerene Aminoethanol Derivative As A Cathode Buffer Layer

Using Ultra-High Molecular Weight Hydrophilic Polymer As Cathode Interlayer for Inverted Polymer Solar Cells: Enhanced Efficiency and Excellent Air-Stability

Solution-derived Poly(ethylene Glycol)-Tio X Nanocomposite Film As a Universal Cathode Buffer Layer for Enhancing Efficiency and Stability of Polymer Solar Cells

Influence of Electrode Interfacial Buffer Layers on Thermal Stability of P3HT:PC61BM Solar Cells