Abstract:In this study, the waste silicon powder generated in the production of solar-grade polysilicon scrap was used as the raw material, and silicon nitride (Si3N4) was directly efficient prepared by the microwave heating nitridation. The temperature raising characteristics of silicon powder by microwave heating and the influencing factors of the nitridation reaction process were studied. The thermogravimetric analysis was performed, and the temperature raising dielectric properties of silicon powder were studied. The electromagnetic field and temperature distributions of the microwave heating-induced silicon powder nitridation process were simulated using COMSOL software. The nitridation reaction of silicon powder induced by microwave heating has better temperature raising characteristics: the average heating rate can reach 135 °C/min, and the reaction time is significantly shortened (only 10-20 min). Microwave heating decreases the nitridation reaction temperature by more than 100 °C and greatly shortens the reaction time. With the increase of nitrogen pressure and reaction time, the nitridation reaction is better. In addition, the conversion of the nitridation reaction is more than 97%, and the products are mainly β-Si3N4 with the uniform and columnar morphology. Finally, it is proved that the efficient recovery and utilization of industrial waste silicon powder are realized, and there is lower energy consumption by microwave heating technology.

Synthesis of Sub-micron Spherical Α-Si3n4 Powder by Direct Nitridation of Silicon Saw Dust

Synthesis of Spherical-Like Β-Si3n4 Powder by Direct Nitridation of Silicon Saw Dust

Synthesis and Characterization of Α-Phase Silicon Nitride Powders by Direct Nitridation

Direct Nitridation Synthesis of Quasi-Spherical Β-Si3n4 Powders with CaF2 Additive.

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Synthesis of Spherical Si3N4 Powders by Liquid‐phase Modified Carbothermal Reduction and Nitridation

Liquid-Phase-Assisted Catalytic Nitridation of Silicon and In Situ Growth of α-Si3N4

Synthesis of Si 3 N 4 powder with tunable α/β-Si 3 N 4 content from waste silica fume using carbothermal reduction nitridation

Efficient Preparation of Si3N4 by Microwave Treatment of Solar-Grade Waste Silicon Powder

Non-catalytic Vapor Synthesis of Α-Si3n4 Nanowhiskers Via Direct Nitridation of Silicon Powders

Preparation of silicon nitride fibers by additive-assisted nitridation of polysilicon waste powder

Additive‐Assisted Nitridation to Synthesize Si3N4 Nanomaterials at a Low Temperature

Preparation of Β-Phase Silicon Nitride Powders

Utilization of Silicon Dust to Prepare Si3N4 Used for Steelmaking Additives: Thermodynamics and Kinetics

Synthesis of SiC-AlN Ceramic Alloy Powder by the Direct Reactions Between the Constituent Elements.

Low-cost High-Yield Synthesis of Nanosize Powders of Si-based Nitrides and Carbides by CO2 Laser Induced Gas Phase Reactions

Liquid Phase Sintering Behavior of Amorphous Nano-Sized Silicon Nitride Powders

Additive-Assisted Nitridation to Synthesize Si<sub>3</sub>N<sub>4</sub>Nanomaterials at a Low Temperature

Research of Silicon Nitride Powder Prepared by Self-propagating High-temperature Synthesis

Fabrication of Fine-Grained Si 3 N 4 -Si 2 N 2 O Composites by Sintering Amorphous Nano-Sized Silicon Nitride Powders