Abstract:Liquid‐phase laser irradiation produced regularly shaped graphene‐coated tungsten carbide (WC@G) core–shell particles, which were integrated into a TiB2 matrix via spark plasma sintering (SPS) to form TiB2/WC@G composite ceramics. Graphene detachment, pull‐out, and crack deflection were identified as the key toughening mechanisms of the composite ceramics. Liquid‐phase laser irradiation technology was utilized to synthesize graphene‐coated tungsten carbide (WC@G) core–shell composite materials with regular spherical morphology. Characterization via scanning electron microscopy, transmission electron microscopy (TEM), X‐ray diffraction, and Raman spectroscopy revealed the evolution of WC particle microstructure from sharp edges to regular spherical shapes post‐laser irradiation. High‐resolution TEM displayed a tightly knit core–shell structure. Raman spectroscopy confirmed graphene presence through D, G, and 2D peaks. Incorporation of WC@G into a titanium diboride matrix, followed by discharge plasma sintering, yielded TiB2/WC@G composite ceramic materials. Compared to TiB2/WC/G composite ceramic materials, the WC@G core–shell structure significantly enhanced sintering performance. Optimal mechanical properties were achieved with 6 wt.% WC@G, exhibiting a relative density of 99.6%, Vickers hardness of 18.5 GPa, flexural strength of 696.9 MPa, and fracture toughness of 8.5 MPa m1/2. Characterization identified graphene detachment, pull‐out, and fracture deflection as key mechanisms enhancing toughness in TiB2/WC@G composite ceramic materials.

Ultrafine Porous Boron Nitride Nanofiber‐toughened WC Composites

Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

Preparation of WC@graphene reinforced titanium diboride‐based composite ceramic materials fabricated via SPS

Synthesis and Densification of Boron Carbide Nanowires

Microstructural evolution and toughening mechanism of WC-Co composite prepared by amorphous-crystallization method

Processing and Properties of Carbon Nanotubes-Nano-wc-co Composites

WC-18wt.% Co with simultaneous improvements in hardness and toughness derived from nanocrystalline powder

Ultrafine‐grained WC‐based Ceramics Prepared Via Two‐step Oscillatory Pressure Sintering

Enhancement of thermal conductivity and abrasion resistance of woody carbon fiber composites via boride catalysis

ZrB2–SiC Spiral Fibers Prepared by Combining Liquid Rope Effect with Non-Solvent-induced Phase Separation Method: A Promising Toughening Material for Ultra-High Temperature Ceramics

Synthesis of cBN-hBN-SiCw Nanocomposite with Superior Hardness, Strength, and Toughness

Mechanical properties and erosion resistance of ceria nano-particle-doped ultrafine WC-12Co composite prepared by spark plasma sintering

Enhanced Mechanical Properties of Nanocrystalline Boron Carbide by Nanoporosity and Interface Phases

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Synergistic strengthening and toughening of oscillatory pressure sintered WC-ZrO2-Al2O3 ceramics

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Ultrafine Binderless WC-based Cemented Carbides with Varied Amounts of AlN Nano-Powder Fabricated by Spark Plasma Sintering

Effects of Carbon Nanotubes Incorporation on the Grain Growth and Properties of WC/Co Nanocomposites

Toughening by SiC Nanowires in a Dense SiC–Si Ceramic Coating for Oxidation Protection of C/C Composites