Abstract:Substrate-integrated-waveguide (SIW) technology can eliminate the limitations associated with conventional rectangular waveguides, i.e., bulky structures and production complexity at higher frequencies. Moreover, SIW technology replaces microstrip structures eliminating the drawback of excessive radiation leakage at higher frequencies. SIW power dividers are key elements in SIW antenna array synthesis. A SIW power divider's design procedures are more complicated than conventional microstrip power dividers. However, no comprehensive review with design guidelines of substrate-integrated-waveguide (SIW) power dividers has been reported. In this paper, different types of SIW power dividers based on their configurations, functionality, and operating principles are analyzed and some recommendations are made for selection purposes. A comprehensive design guideline for SIW power dividers is given in this paper through a comparative study of T- and Y-type SIW junctions. These guidelines are based on key parameters, including insertion loss, isolation, co-phase bandwidth, return loss bandwidth, and phase balancing. This study provides valuable information for selecting and designing the best possible configuration of SIW power dividers for specific applications in microwave and millimeter-wave frequency ranges. A case study of a Ku-band SIW power divider is performed for a Ku-band soil moisture radiometer SIW antenna array.

Design of Compact Substrate Integrated Waveguide Based Triple- and Quad-Band Power Dividers

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Miniaturized Dual-Band Substrate Integrated Waveguide Filter with Controllable Bandwidths

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

Compact Multi-Band Power Dividers Based on Stub Loaded Stepped-Impedance Resonators with Defected Microstrip Structure (Sl-Sir-dms)

SIW based in-phase Gysel equal power divider for X-band application

Implementation of three-way power divider based on substrate integrated waveguide

Four-way SIW Filtering Power Divider with In- and Out-of-phase Characteristics and Large Power Division Ratio

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

The Art of Substrate-Integrated-Waveguide Power Dividers

Three-Way Substrate-Integrated Waveguide Filtering Power Divider with In-Phase and Anti-Phase Outputs

Design of Compact UWB Power Divider with One Narrow Notch-Band

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Wideband three-way power divider with bandpass filtering response using unequal-width three-coupled line

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

Wideband Four-Way Filtering Power Divider Based on Hybrid Spoof Surface Plasmon Polariton and Substrate Integrated Waveguide

A large-transverse-size short-pulse 4-way power divider with high fidelity