Abstract:The fault-tolerant control after phase loss is crucial in the studies of the six-phase permanent magnet synchronous motor (PMSM), and the one phase loss is the most frequent phase loss fault. To improve the system instability caused by nonlinear and time-varying perturbations of inductance parameters in a double-Y phase shifted 30° six-phase PMSM, an improved deadbeat predictive current fault-tolerant control (DPC-FTC) method is proposed in this study. The transformation matrix after single-phase open-phase is first reduced and reconstructed, and the reduced-dimensional voltage equation is derived. Based on this equation, the deadbeat current predictive control is then used to predict the expected voltage using the current feedback value and the reference value, so as to shorten the response time and improve the overall control effect. The voltage equation after parameter perturbation is rewritten, and the current discrete transfer function under constant expected voltage before and after parameter perturbation is calculated. Afterwards, to further improve the low stability of fault-tolerant control after phase loss, which is caused by the inductance parameter perturbation of the control system, the weight coefficient is introduced in order to enhance the deadbeat predictive current control so that it splits and optimizes the direct-quadrature axis current. The stability of the system is then analyzed. By changing the weight coefficient, the fault-tolerant control system has a wider stable working range. Finally, the simulation model and experimental platform are completed. The results show that the improved DPC-FTC method improves the permissible inductor parameter uptake range by a factor of 1/β, reduces the current static difference by 32.05% and 46.02% when the inductor parameter is mismatched by a factor of 2, reduces the current oscillation and effectively reduces the sensitivity of system stability to inductor parameter uptake.

Fault-Tolerant Control of Twelve-Phase PMSM Based on Motor Model Reconstruction in FESS

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

A Fault-Tolerant Control Method of 12-Phase PMSM in FESS

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Fault-Tolerant Control of Dual Three-Phase PMSM Based on Minimum Copper Loss under Multi-Phase Open and Open-Switch Faults

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Fault-Tolerant Control of Dual-Three-Phase PMSM under Open-Phase Fault Based on Two-Individual Current Control

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Simple fault tolerant control of dual three-phase PMSM under one phase open-circuited condition

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

A Sensorless Control Method Based on MRAS for 12-Phase PMSM in FESS

Fault-tolerant control strategy of six-phase permanent magnet synchronous motor based on deadbeat current prediction

Fault-Tolerant Control Method for Five-Phase PMSM with High Control Performance and Low Computational Burden

Harmonic Analysis And Fault-Tolerant Capability Of A Semi-12-Phase Permanent-Magnet Synchronous Machine Used For Evs

Control strategy for a four-phase fault-tolerant permanent-magnet synchronous machine

Single-phase Open-circuit Fault-tolerant Control for a Dual Five-phase Permanent Magnet Motor with Multi-operational Modes