Abstract:Cd alloying pure sulfide kesterite solar cells by regulating the alloying concentration and the grain growth process systematically from Sn4+‐DMSO solution approach makes a large‐grain spanning absorber monolayer and significantly suppresses deep‐level defects. At the optimal concentration, a champion device with an efficiency of 12.3% is achieved with a record low open‐circuit voltage loss even without post heat treatment. Cd alloying has been theoretically proved to be an effective strategy to suppress Cu‐Zn antisite defects and related defect cluster for improving device performance of pure sulfide kesterite Cu2ZnSnS4 (CZTS) thin film solar cells. However, the potential of Cd alloying has not been fully realized by solely doping without further post heat‐treatment. Here, Cd alloying CZTS (Cu2(Zn,Cd)SnS4, CZCTS) is reported through dimethyl sulfoxide (DMSO) solution and how alloying concentration affects reaction path, grain growth, and electronic properties of the CZCTS absorbers is investigated. This study found that Cd can be incorporated into CZTS through direct phase transformation grain growth, which sufficiently suppresses band tailing. High quality CZCTS absorber films and efficient solar cells are fabricated within a wide range of alloy concentration. A champion CZCTS device with a power conversion efficiency of 12.3% is achieved at 35% Cd concentration without any post heat treatment, improved by over 70% compared to 7.0% of CZTS. This device exhibits a high VOC gain to the Shockley–Queisser (Voc/VocSQ = 59.7%), the lowest VOC deficit achieved in pure sulfide kesterite solar cells. The results demonstrate the importance of the Cd alloying strategy for mitigating band tailing and achieving high efficiency pure sulfide kesterite solar cells.

Identifying the origin of the <i>V</i><sub>oc</sub> deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn<SUP>2+</SUP> and Sn<SUP>4+</SUP> precursors in DMSO solution

Identifying the origin of the V oc deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn 2+ and Sn 4+ precursors in DMSO solution

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Engineering Solar Cell Absorbers by Exploring the Band Alignment and Defect Disparity: The Case of Cu‐ and Ag‐Based Kesterite Compounds

Abundance Of Cu-Zn + Sn-Zn And 2cu(Zn) + Sn-Zn Defect Clusters In Kesterite Solar Cells

Defect Control for 12.5% Efficiency Cu2 ZnSnSe4 Kesterite Thin-Film Solar Cells by Engineering of Local Chemical Environment

A Strategy to Stabilize Kesterite Czts for High-Performance Solar Cells

Defect Control for 12.5% Efficiency Cu2ZnSnSe4 Kesterite Thin-Film Solar Cells by Engineering of Local Chemical Environment

Ag Incorporation with Controlled Grain Growth Enables 12.5% Efficient Kesterite Solar Cell with Open Circuit Voltage Reached 64.2% Shockley–Queisser Limit

Efficient kesterite Ag-alloyed Cu 2 ZnSn(S,Se) 4 thin film solar cells with a front Ag grading distribution enabled by ZnO insert layer

Suppressing Element Inhomogeneity Enables 14.9% Efficiency CZTSSe Solar Cells

Synergistic Crystallization Modulation and Defects Passivation in Kesterite via Anion-Coordinate Precursor Engineering for Efficient Solar Cells

Structural, Electronic and Defect Properties of Cu 2 ZnSn(S,Se) 4 Alloys

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios

Crystal Structure and Defect Reactions in the Kesterite Solar Cell Absorber Cu[sub 2]znsns[sub 4] (CZTS): Theoretical Insights

Regulating Hetero‐Nucleation Enabling Over 14% Efficient Kesterite Solar Cells

Microenvironment Created by SnSe2 Vapor and Pre‐Selenization to Stabilize the Surface and Back Contact in Kesterite Solar Cells

Defect Regulation by Palladium Incorporation towards Grain Boundaries of Kesterite solar cells

Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency

12.3% Efficient Low Voc Loss Pure Sulfide Kesterite Solar Cells from DMSO Solution via Cadmium Alloying