Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Microstructure and Nanoindentation Creep Behavior of IC10 Directionally Solidified Superalloy Repaired by Laser Metal Deposition

Microstructure and wear behavior of IC10 directionally solidified superalloy repaired by directed energy deposition

Hot cracking behavior and mechanism of the IC10 directionally solidified superalloy during laser re-melting

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

A Study on the Cracking Behaviour in Laser Metal Deposition of IC10 Directionally Solidified Nickel-Based Superalloy

Mechanical Performance of Laser Deposition Repairing of in 738 on Directionally Solidified Superalloy Blade

Elimination of hot cracking in the laser surface re-melting of the IC10 superalloy by controlling the heat input

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Laser cladding repairing of directionally solidified nickel base superalloy and its tensile properties

The Effect of Optimized Substrate Orientation on Layer Step in Laser Metal Deposition of Single-Crystal Nickel-Base Superalloys

The Interface Microstructures and Mechanical Properties of Laser Additive Repaired Inconel 625 Alloy

Influences of Cooling Conditions on the Liquation Cracking in Laser Metal Deposition of a Directionally Solidified Superalloy

Picosecond laser drilling study of directional solidification Ni3Al-based superalloy

Distribution of Microstructure, Elastic Modulus and Residual Stress Near the Interface in Laser Repaired GH4169 Superalloy

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

A Synchrotron Study of Microstructure Gradient in Laser Additively Formed Epitaxial Ni-based Superalloy

Optimizing the electrochemical corrosion performance of laser cladded Ni-based single crystal superalloy via manipulation of γ′(Ni 3 Al) phase

Epitaxial laser deposition of single crystal Ni-based superalloys: Repair of complex geometry

Direct Laser Deposition of Inconel 738 on Directionally Solidified Ni-base Superalloy Component

Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing