Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Microstructure and wear behavior of IC10 directionally solidified superalloy repaired by directed energy deposition

Microstructure and Nanoindentation Creep Behavior of IC10 Directionally Solidified Superalloy Repaired by Laser Metal Deposition

High-temperature oxidation behavior of a directionally solidified superalloy repaired by directed energy deposition

Microstructure evolution and mechanical properties of wire-fed electron beam directed energy deposition repaired GH4169 superalloy

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Experimental Characterization of a Direct Metal Deposited Cobalt-Based Alloy on Tool Steel for Component Repair

Hot cracking behavior and mechanism of the IC10 directionally solidified superalloy during laser re-melting

Directed energy deposition‐arc repair Al6.5Cu2Ni0.3Ti0.5Zr0.25V alloy: Microstructure evolution and Strengthening mechanism

Mechanical Performance of Laser Deposition Repairing of in 738 on Directionally Solidified Superalloy Blade

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

A Study on the Cracking Behaviour in Laser Metal Deposition of IC10 Directionally Solidified Nickel-Based Superalloy

Studies on the Microstructure and Mechanical Properties of AlCu4MgSi Aluminum Alloy Repaired Via Electron Beam Directed Energy Deposition

Effect of microsegregation behaviors on solidification microstructure of IC10 superalloy fabricated by directed energy deposition

Investigation of α phase evolution and tensile fracture behavior of Ti5Al2Sn2Zr4Mo4Cr alloy fabricated by directed energy deposition

Microstructure and Mechanical Properties of IN718 on 42crmo for Repair Applications by Laser Directed Energy Deposition

Revealing the microstructural evolution and mechanical response of repaired Fe-Cr-Si based alloy by directed energy deposition

Microstructure evolution and mechanical properties of a nickel-based superalloy repaired using wire and arc additive manufacturing

Enhanced wear resistance of Ti reinforced Inconel 718 superalloy manufactured by laser directed energy deposition

Tailoring the Crystalline Structures and Mechanical Properties of IN718 Alloy Repaired by Wire-Fed Electron Beam Directed Energy Deposition Through a Custom-Designed Heat Treatment Process

Microstructure-property gradients in the GH4099 superalloy fabricated by directed energy deposition and its response to heat treatment

Distribution of Microstructure, Elastic Modulus and Residual Stress Near the Interface in Laser Repaired GH4169 Superalloy