Abstract:Improving thermal efficiency in advanced ultra-supercritical coal-fired power plants relies on increased steam temperature and pressure, accelerating the emergence of newly complex-concentrated alloys (CCAs). However, the new developed CCA have a combined Al and Ti content for 4.87 wt.%, which indicates a high susceptibility to hot cracking. In this work, the hot cracking problem for the CCA during the laser deposition process was studied. The eutectic of the matrix and carbides with a low melting point liquefied during reheating process. The hot cracking occurred with local unbearable stress concentration. Based on the above analysis of hot cracking, a novel integrated directed laser deposition method was proposed to flexibly adjust the microstructure evolution and stress distribution by thermal cycles to achieve the control of hot cracks. The microstructure evolution and the control of residual stress are realized by gas quenching and preheating substrates, respectively. The evidence was obtained to show that the coupled process with synchronous gas quenching during preheating can eliminate the hot cracks effectively. More specifically, the preheating process relieved the residual stress, and the local gas quenching simultaneously accelerated the liquid film solidification and reduced carbide segregation. Finally, the sample prepared by the integrated directed energy deposition presented superior overall performance with ultimate tensile strength of 991.84 MPa and elongation of 18.28%. This work provides a meaningful reference for producing crack-free superalloys in metal additive manufacturing.

Elimination of hot cracking in the laser surface re-melting of the IC10 superalloy by controlling the heat input

Hot cracking behavior and mechanism of the IC10 directionally solidified superalloy during laser re-melting

A Study on the Cracking Behaviour in Laser Metal Deposition of IC10 Directionally Solidified Nickel-Based Superalloy

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Microstructure Control and Hot Cracking Prevention During Laser Additive Manufacturing of Cobalt-Based Superalloy

Influences of Cooling Conditions on the Liquation Cracking in Laser Metal Deposition of a Directionally Solidified Superalloy

Investigation on the hot crack sensitivity of a nickel-based single crystal superalloy fabricated by epitaxial laser metal forming

The mechanism and regulation of hot cracking in a new complex-concentrated alloy by a novel integrated directed energy deposition

Microstructure and Nanoindentation Creep Behavior of IC10 Directionally Solidified Superalloy Repaired by Laser Metal Deposition

Origin of hot cracking formation and suppression method in laser additive manufactured nickel-based superalloys

Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy deposition

Laser cladding repairing of directionally solidified nickel base superalloy and its tensile properties

The role of the pulsed-wave laser characteristics on restraining hot cracking in laser cladding non-weldable nickel-based superalloy

Mitigating hot-cracking of laser melted CoCrFeNiMnTix high-entropy alloys

Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint

Study On Cracks And Microstructures Of Ic10 Single Crystal Superalloys By Laser Welding

Research on hot cracking in laser welding of Al-contaminated CoCrFeMnNi high-entropy alloys

Optimizing for IC10 Single Crystal Ni3Al-based Alloy Joint by Electron Beam Welding with Chemical Composition Controlling

Crack Inhibition and Performance Modification of NiCoCr-Based Superalloy with Y2O3 Nanoparticles by Laser Metal Deposition

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

TLP repaired IN738LC superalloy with uneven surface defect gap width after post heat treatment: Microstructure and mechanical properties