Abstract:Excellent thermoelectric cooling and power generation are simultaneously realized in an n-type PbTe-based thermoelectric material. The cooling temperature difference (Delta T) of approximate to 15.6 K, maximum power density of approximate to 0.4 W cm(-2) and conversion efficiency of approximate to 1.5% with T-C = 295 K and T-H = 765 K can be obtained in a single-leg device composed of PbTe-30%SnSe-1.5%Cu. This advanced thermoelectric performance in n-type PbTe-30%SnSe-1.5%Cu mainly originates from its high-ranged ZT value achieved through optimizing its bandgap, carrier density, and microstructure. The bandgap in PbTe is first reduced by SnSe alloying to facilitate the carrier transport properties at low temperature range (300-573 K). With further tuned carrier density, the average power factor increases from approximate to 10.2 mu W cm(-1) K-2 in Pb0.985Sb0.015Te-30%SnSe to approximate to 16.2 mu W cm(-1) K-2 in PbTe-30%SnSe-1.5%Cu at 300-773 K. Moreover, microstructure observation reveals high-density dislocations in PbTe-30% SnSe-1.5% Cu, which can dramatically suppress the room-temperature lattice thermal conductivity from approximate to 2.21 Wm(-1) K-1 in Pb0.985Sb0.015Te to approximate to 0.53 Wm(-1) K-1 in PbTe-30%SnSe-1.5%Cu. As a result, a room-temperature ZT value of approximate to 0.7 and high average ZT value (ZT(ave)) of approximate to 0.98 can be obtained in PbTe-30%SnSe-1.5%Cu at 300-573 K, which makes its performance comparable to the commercial n-type Bi2Te3-based thermoelectric material.

Thermoelectric Transport Characteristics of N-Type (Pbte)1-X-y(pbs)x(sb2se3)y Systems Via Stepwise Addition of Dual Components

Enhanced thermoelectric performance of n -type PbTe bulk materials fabricated by semisolid powder processing

High Thermoelectric Efficiency Of N-Type Pbs

High Performance of N-Type (Pbs)(1-X-y)(pbse)(x)(pbte)(y) Thermoelectric Materials

Thermoelectric Performance in Pseudo-Ternary (Pbte)0.95-X(sb2se3)x(pbs)0.05 System with Ultra-Low Thermal Conductivity Via Multi-Scale Phonon Scattering

Synergistically Optimizing Charge and Phonon Transport Properties in N-Type PbTe Via Introducing Ternary Compound AgSb(Se, Te)2

Thermopower enhancement in Pb1|[minus]|xMnxTe alloys and its effect on thermoelectric efficiency

Achieving Higher Thermoelectric Performance of N-Type PbTe by Adjusting the Band Structure and Enhanced Phonon Scattering

Achieving higher thermoelectric performance of n-type PbTe by adjusting band structure and enhanced phonons scattering

Subtle Roles of Sb and S in Regulating the Thermoelectric Properties of N‐Type PbTe to High Performance

Thermopower enhancement in Pb 1− x Mn x Te alloys and its effect on thermoelectric efficiency

Enhancing Thermoelectric Performance of N-Type PbTe Through Separately Optimizing Phonon and Charge Transport Properties

Enhancing Thermoelectric Performance of p-Type PbSe through Suppressing Electronic Thermal Transports

Thermoelectric enhancement for n-type PbS via synergistic effect of Ti doping and Cu2S compositing

High-Ranged <i>ZT</i> Value Promotes Thermoelectric Cooling and Power Generation in n-Type PbTe

Synergistically Optimizing Electrical and Thermal Transport Properties of N-Type PbSe

Remarkable Roles of Cu to Synergistically Optimize Phonon and Carrier Transport in N-Type PbTe-Cu2Te

Comprehensive Investigation on the Thermoelectric Properties of P‐type PbTe‐PbSe‐PbS Alloys

High Thermoelectric Performance of p-Type PbTe Enabled by the Synergy of Resonance Scattering and Lattice Softening

Synergistically Enhancing Thermoelectric Performance of N‐type PbTe with Indium Doping and Sulfur Alloying

Approaching Topological Insulating States Leads to High Thermoelectric Performance in N-Type PbTe