Abstract:Polyacrylonitrile (PAN) fiber modification can promote the stabilization efficiency and mechanical properties of the subsequent carbon fibers; however, it could cause damage to the fibers to some extent. In this article, the effects of NaIO 4 treatment on the chemical and physical properties of PAN fibers were investigated. After NaIO 4 modification, the cyclization reaction has partially occurred, owing to the FTIR revealed that the C≡N peak was weakened, but the C=N stretching vibration peak, the –N = C=O stretching vibration peak, the C=O stretching vibration absorption peak, and the short sequence conjugate C=N characteristic peak were enhanced simultaneously, indicating a successful cyclization and dehydrogenation reaction. Moreover, owing to more oxygen-containing functional groups successfully attached to the PAN fibers and the cyclization reaction taking place, the initial temperature, peak temperature, and heat release of cyclization decreased, which means a more efficient and safer stabilization process. X-ray diffraction (XRD) showed that the (100) crystal plane microcrystal size was the smallest at 40 °C of the modification temperature, whereas the (002) crystal plane microcrystal size was the largest at 60 °C. The modified stabilized PAN fibers presented lower crystallinity and a more aromatic structure compared with untreated fibers. Raman spectra revealed a significant increase in the intensity of the G peak after NaIO 4 modification; the R -value decreased from 1.65 to 1.43, demonstrating a transformation of the sp 3 hybrid carbon structure into a more graphite-like sp 2 hybrid C=C structure. Meanwhile, scanning electron microscopy (SEM) images disclosed additional grooves and cracks on the fiber surface after modification.

Comparative Study of Conventional and Microwave Heating of Polyacrylonitrile-Based Fibres

Study on the Oxidative Stabilization of Polyacrylonitrile Fibers by Microwave Heating

Microwave Treatment of Pre-Oxidized Fibers for Improving Their Structure and Mechanical Properties

A Two-Step Microwave Annealing Process for PAN Pre-Oxidation through a TM-Mode Cavity

Microwave heating oxidative stabilization of KMnO4 modified polyacrylonitrile-based carbon fiber precursor

Stabilization of polyacrylonitrile-based fiber with a quasi-traveling microwave applicator

Comparative investigation on the thermal degradation and stabilization of carbon fiber precursors

Study on preparation of high cyclization degree and high strength pre-oxidized fiber by nitration

The micro-void structure transformation and properties assessment of polyacrylonitrile fibers irradiated by electron-beam as carbon fiber precursor

Structural Transformation of Polyacrylonitrile (PAN) Fibers during Rapid Thermal Pretreatment in Nitrogen Atmosphere

Radiation assisted pre-oxidation of polyacrylonitrile fiber: Graphite formation and lower crystal size revealed by 2D WAXD at a synchrotron facility

In Situ Study and Improvement of the Temperature Increase and Isothermal Retention Stages in the Polyacrylonitrile (PAN) Fiber Pre-Oxidation Process

X-ray photoelectron spectroscopy investigation into thermal degradation and stabilization of polyacrylonitrile fibers

Thermal Characterization of Submicron Polyacrylonitrile Fibers Based on Optical Heating and Electrical Thermal Sensing

Effect of KMnO4 on chemical, crystal and microscopic structure of polyacrylonitrile fibers

Comparative Analysis of Thermal Characteristics: Virgin Polyacrylonitrile (PAN) Versus Electrospun Pan Nanofibre Mats

Study on Structure Evolution and Reaction Mechanism in Microwave Pre-oxidation

Study on the Changes of Structures and Properties of PAN Fibers during the Cyclic Reaction in Supercritical Carbon Dioxide

INFLUENCE OF THERMAL TREATMENT ON CRYSTAL MELTING BEHAVIOR AND CRYSTAL STRUCTURE OF NYLON 6 AND POLYAMIDE BLOCK COPOLYMER/NYLON 6 BLENDS

Microwave Radiation Effects on Carbon Fibres Interfacial Performance

Effects of NaIO4 treatment on the chemical and physical properties of polyacrylonitrile fibers