Abstract:Modification of polyacrylonitrile (PAN) yarn by impregnation with ammonium bromide, phosphoric acid and urea (A‐P‐U) solution prior to multi‐step thermal stabilization in air atmosphere. A polyacrylonitrile (PAN) multi‐filament bundle underwent a multi‐step heat treatment following impregnation with a solution of ammonium bromide, phosphoric acid and urea (A‐P‐U). The multi‐step thermal stabilization process was conducted in an air atmosphere at temperatures ranging from 200 to 245 °C for various stabilization times spanning from 10 to 70 min. Comprehensive analysis of physical and mechanical properties, infrared (IR) spectroscopy, X‐ray diffraction (XRD) and thermal analysis (DSC and TGA) revealed the significant influence of stabilization time on the structure and properties of thermally stabilized PAN multi‐filament bundle. The fiber thickness and linear density of the stabilized fibers decreased by approximately 29.5% and 10.6%, respectively, after 70 min of heat treatment. However, the fiber density value increased from 1.18 to 1.38 g cm−3 during the same stabilization time. Additionally, the carbon yield value obtained using TGA increased from 31% to 73% at 850 °C. The presence of A‐P‐U markedly reduced the time needed for the conversion of the PAN polymer into a cyclized structure through its nitrile groups, thereby accelerating the stabilization reactions. Furthermore, the IR spectra exhibited the appearance of CC bonds, signaling the creation of a crosslinked ladder‐like structure. The XRD traces confirmed the decrease in crystallinity with increasing stabilization time, consistent with the findings from IR spectra. The findings showed that the A‐P‐U integrated system is notably successful and proficient in promoting the cyclization of nitrile groups, thereby decreasing the time needed to establish a thermally stable structure capable of withstanding elevated carbonization temperatures. © 2024 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Rapid and Continuous Preparation of Polyacrylonitrile-Based Carbon Fibers with Electron-Beam Irradiation Pretreatment

Structural Transformation of Polyacrylonitrile (PAN) Fibers during Rapid Thermal Pretreatment in Nitrogen Atmosphere

The micro-void structure transformation and properties assessment of polyacrylonitrile fibers irradiated by electron-beam as carbon fiber precursor

Multi‐step heating strategy during thermal stabilization of polyacrylonitrile multi‐filament bundle before carbonization

Effect of Stretching on the Orientation Structure and Reaction Behavior of PAN Fiber During the Thermal Stabilization

Stabilization of polyacrylonitrile-based fiber with a quasi-traveling microwave applicator

Effect of stabilization and carbonization treatment on the chemical and physical transformation of polyacrylonitrile (PAN) based electrospun carbon nanofibers

Effect of Polyacrylonitrile Precursor Orientation on the Structures and Properties of Thermally Stabilized Carbon Fiber

Comparative investigation on the thermal degradation and stabilization of carbon fiber precursors

Radiation assisted pre-oxidation of polyacrylonitrile fiber: Graphite formation and lower crystal size revealed by 2D WAXD at a synchrotron facility

Structural Changes of Polyacrylonitrile Precursor Fiber Induced by Γ-Ray Irradiation

Preparation, Stabilization and Carbonization of a Novel Polyacrylonitrile-Based Carbon Fiber Precursor

In Situ Study and Improvement of the Temperature Increase and Isothermal Retention Stages in the Polyacrylonitrile (PAN) Fiber Pre-Oxidation Process

Stabilization Study of Polyacrylonitrile/Cellulose Nanocrystals Composite Fibers

Aqueous Photoiniferter Polymerization of Acrylonitrile

PREPARATION OF POLYACRYLONITRILE-BASED CARBON NANOSPHERES

The effect of using two stabilization temperatures and fixation process on preparation of carbon nanofibers

Study on the Changes of Structures and Properties of PAN Fibers during the Cyclic Reaction in Supercritical Carbon Dioxide

A one-step hot pressing molding method of polyacrylonitrile carbon fibers: influence on surface morphology, microstructure and mechanical property

Accelerated thermostabilization through electron-beam irradiation for the preparation of cellulose-derived carbon fibers

On the structural changes, mechanism and kinetics of stabilization of lignin blended polyacrylonitrile copolymer fiber