Abstract:Herein, all the possible methods of heat integration to the distillation column in ammonia–water absorption refrigeration cycle are investigated. Further increasing the cycle complexity may not increase the thermal performance too much after reaching the saturation region. A guideline for the selection of suitable cycles with satisfied thermal performance and without too complicated configurations is provided. In this study, a comprehensive method to optimize distillation columns in ammonia–water absorption refrigeration, power, and cogeneration cycles is introduced. The novelty of this work lies in a comprehensive analysis of the distillation column's thermal performance and the introduction of a new design framework that maximizes heat integration. Key findings include the critical role of the solution heat exchanger, especially at lower generation and evaporation temperatures. Using a saturated liquid or two‐phase feed can achieve up to 80% efficiency at a feed composition of 0.3. Moreover, in the results, the substantial potential for improving the coefficient of performance (COP) through strategic design is highlighted. Notably, minimizing the pinch point temperature difference to 0 °C can boost the COP by 6%, while optimal feed placement can increase it by 9%. Incorporating feed preconditioning and side exchangers can lead to a 22% COP enhancement, indicating the significance of heat integration to the distillation column. In this study, a graphic guideline for selecting cycles that can achieve a minimum of 10% COP improvement without introducing unnecessary complexity is delivered and it suggests that distillation columns can be simplified by using a combination of separators, heaters, and coolers in certain cases.

Performance analysis of ammonia-water absorption/compression combined refrigeration cycle

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

A novel absorption refrigeration cycle

Comparative Study on the Energy Performance of Two Different Absorption-Compression Refrigeration Cycles Driven by Low-Grade Heat

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Research and Analysis of the New Cycle with Super-Subcooling Single Stage Ammonia Compression Refrigeration System

Comparative Study on Two Low-Grade Heat Driven Absorption-Compression Refrigeration Cycles Based on Energy, Exergy, Economic and Environmental (4E) Analyses

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Analysis on Maximum Internal Heat Recovery of A Mass-Coupled Two Stage Ammonia Water Absorption Refrigeration System

Numerical investigation and optimization of a proposed heat-driven compression/absorption hybrid refrigeration system combined with a power cycle

Heat Integration of Ammonia-Water Absorption Refrigeration System Through Heat-Exchanger Network Analysis

Thermodynamic Analysis of a New Combined Cooling and Power System Using Ammonia–water Mixture

Thermodynamic analysis of a novel ammonia-water power/cooling combined system with adjustable refrigeration-to-power ratio

Performance Analysis of Compression-assisted Absorption Refrigeration Cycles Using Low GWP Refrigerant/[P6,6,6,14][Cl] Working Pairs

A SIMPLIFIED AMMONIA WATER ABSORPTION CYCLE WITHOUT DISTILLATION COLUMN IN SMALL TEMPERATURE LIFT APPLICATIONS

An Improved Cycle for Large Temperature Lifts Application in Water-Ammonia Absorption System

Thermodynamical Analysis of the Distillation Column for Targeting Minimum Energy in Ammonia–Water Absorption Refrigeration Cycle

Simulation of a new combined absorption-compression refrigeration cycle

THERMODYNAMIC ANALYSIS ON AN AMMONIA WATER ABSORPTION-RESORPTION SYSTEM FOR HEAT PUMP APPLICATION

NVEL AMMONIA-WATER ABSORPTION REFRIGERATION SYSTEMS

Thermodynamic Analysis of Air-Cycle Refrigeration Systems with Expansion Work Recovery for Compartment Air Conditioning