Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Web-based Machining Chip-breaking Predictive System of Three-dimensional Grooved Inserts

Simulation of Chip Formation in High-Speed Hard Machining

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Establishing Model and Design on the 3-D Chip Breaker of Carbide Indexable Inserts

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Research and Development on Intelligent Cutting Tools with Capability of On-line Monitoring and Prediction

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Three-dimensional turning force prediction based on hybrid finite element and predictive machining theory considering edge radius and nose radius

Machined surface prediction and reliability analysis in peripheral milling operations

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Online Machining Error Estimation Method of Numerical Control Gear Grinding Machine Tool Based on Data Analysis of Internal Sensors

Ct-SELECTOR: A Web Application for Cutting-Tool Selection in a CNC Machining Workshop

Research on the prediction system of cutting tool life

An intelligent prediction model of the tool wear based on machine learning in turning high strength steel

Online monitoring model of micro-milling force incorporating tool wear prediction process

An Embedded Tool Condition Monitoring System for Intelligent Machining

Theory Analysis of Three-dimensional Grooved Inserts Representative Geometry Cells

Research on reusable and configurable intelligent machining system

Development Of An Integrated System Of Geometric Modeling And Machining Simulation Of End Mill

Chipping analysis and prediction in gear skiving process using multi-infeed strategy