Abstract:With the broader applications of numeric control(NC),flexible manufacturing systems(FMS), computer integrated manufacturing systems(CIMS), ete., modern technologies with new-style chip farmers are employed widely at the present time, vibration drilling is one of the examples among them. Since the chip-breaking performance of the tool is regarded as one of the important factors maintaining the continuity of the machining process, then it is necessary to investigate systematically and comprehensively the rules of chip-breaking in vibration drilling. The paper begins with the chip breakage mechanism in vibration drilling, and delimits a boundary between two types of chip-breaking method- the completely chip-breaking model and the non-completely chip-breaking model. A great deal of highly effective work about the chip-breaking in vibration drilling of the completely chip-breaking model has been done, but the non-completely chip-breaking model is seldom involved. In this paper, a stress model based on the function of the rake angle of non-completely chip-breaking is firstly presented and chip-breaking conditional expression is obtained by considering "the character slip shear plane" cutting model, this approach is quite useful which not only breaks through the judgment that chip-breaking is impossible under zero-phase-difference condition, but also consummates the geometry model based on the function of the relief angle put forward by Prof. Wang. In order to testify the correctness of the stress model based on the function of the rake angle of non-completely chip-breaking in vibration drilling, new kinds of exciter and small diameter internal chip disposal drill(Phi5mm) self-designed are suggested, and they are successfully used in drilling aluminum alloy LY12 and brass HPb59-1, and the good drilling effects are obtained. Since the drill has a quite large relief angle, and the vibration parameters chosen avoid the completely chip-breaking model intentionally, so the vibration drilling is at the non-completely chip-breaking model and effects of the relief angle is ignored, the experimental results is found to agree reasonably well with the stress model of the non-completely chip-breaking.

Establishing Model and Design on the 3-D Chip Breaker of Carbide Indexable Inserts

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Simulation of Chip Formation in High-Speed Hard Machining

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Comparative Experiments for Different End Mills of Indexable Inserts with 3-D Chip Breaker

The design of chip breaking grooves for spade drill inserts

Theory Analysis of Three-dimensional Grooved Inserts Representative Geometry Cells

Research on Chip Shapes Analysis and Optimization Design of Chip-Breaker in Cutting the Cylindrical Shell Material

Web-based Machining Chip-breaking Predictive System of Three-dimensional Grooved Inserts

Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting

A Research To The Stress Model Of The Non-Completely Chip-Breaking In Vibration Drilling

Competing Fracture Modeling of Thin Chip Pick-Up Process

Modeling Cutter Engagement Region for Triangular Mesh

Study on Clearance Flank Geometry Modeling of Finishing Milling Cutter with Fir-slot

Large Chip Production Mechanism under the Extreme Load Cutting Conditions

A Novel Design Method for Chip Flute of Indexable Insert Drill Used at Large Drilling Depth

An accurate mathematical model for ball end mills with chisel edge

Analysis of Generation and Curling Deformation Mechanism of Large Chips in Heavy-Duty Cutting

An accurate 3D surface topography model for single-point diamond turning