Abstract:Superalloys are widely applied in the aerospace industry, and it is one of classical difficult-to-cut materials. In cutting process, the chip is wound around the workpiece and tool which is not easy to break. So it reduces the tool life and the surface quality of machined surface. Polycrystalline cubic boron nitride (PCBN) is super-hard cutting tool which has excellent performance in machining superalloys and high strength steel. However, due to the material propertiesof PCBN, tools are usually flat rake face so that it is difficult to break chip. High pressure cooling is a new type of machining technology in high efficiency metal which can effectively improve the chip breaking performance, improve the tool life and surface quality. At present, there is little research on the mechanism of high pressure coolingchip breaking. In order to study the chip breaking mechanism of cutting superalloys with high pressure cooling, Through the establishment of chip curling radius prediction model and chip breaking mode, study on chip breaking mechanism under high pressure cooling. The experimental study on PCBN cutting nickel base superalloys under high pressure cooling is carried out to study the change of chip curling radius under different coolant pressure, and validate the theoretical analysis result. The results demonstrate that due to the presence of high-pressure coolant in high pressure cooling process, chip is affected by additional cooling fluid pressure and it makes the moment change with result of the decrease of cutting crimp radius, it eventually leads to the chip easy to be broken. Because ofthe change of the crimp radius, limit feed and limit cutting depth reduce. High pressure cooling process can improve the chip breaking performance, and the above results can provide some technical support and reference for the subsequent high pressure cooling process.

Research on Chip Shapes Analysis and Optimization Design of Chip-Breaker in Cutting the Cylindrical Shell Material

Simulation of Chip Formation in High-Speed Hard Machining

Analysis of the Chip-Splitting Performance of a Dedicated Cutting Tool in Dry Orbital Drilling Process

Theory Analysis of Three-dimensional Grooved Inserts Representative Geometry Cells

The design of chip breaking grooves for spade drill inserts

Large Chip Production Mechanism under the Extreme Load Cutting Conditions

Analysis of Generation and Curling Deformation Mechanism of Large Chips in Heavy-Duty Cutting

Establishing Model and Design on the 3-D Chip Breaker of Carbide Indexable Inserts

Reaserch on Mechanism and Experimental of Chip Breaking During High Pressure Cooling Turning of Superalloys with PCBN Tool

The effect of secondary cutting on the chip breaking in turning with (Ti,W)C cermet cutting tools

Analysis of Chip Morphology in Heavy Milling of 508III Steel Considering Different Tool Wear Conditions

Effects of chip breaker groove and tool nose radius on progressive tool wear and behavior when turning GH3536 nickel-based superalloys

Study on chip shapes in longitudinal-torsional composite ultrasonic vibration–assisted drilling of Ti-6Al-4V

Optimizing Design of the Cutting Tool in Cutting of Ultra-High Strength Steel Beam Part

Experimental Investigation of the Influence of Chip Interference on Burr Height in Machining Micro V-grooves on Electroplated Copper Roll Die

Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior

Study on tool wear for efficient grooving blisk with disc milling cutter

Research on the Machining Ability for Rough Machining of Large Hydrogenated Cylindrical Shell Forging

Research on breakage characteristics in side milling of titanium alloy with cemented carbide end mill

Analysis on wear patterns and mechanisms of carbide tool for face-hobbing of spiral bevel gear

Optimized Design of Structural Parameters of Si3N4-based Ceramic Tools with Variable Cross-Section