Abstract:The cutting process of titanium alloy Ti6Al4V is accompanied by high strain, high strain rate, and high-temperature thermal-force coupled deformation. A suitable constitutive model is critical for whether the finite element simulation can accurately reflect the elastic-plastic deformation behavior during the actual machining process. To solve the problem that the conventional Johnson-Cook constitutive model cannot accurately describe the material strain softening effect when turning Ti6Al4V, and the applicability of the model included in the material library of commercial ABAQUS finite element software is limited, a simulation research of turning Ti6Al4V based on the TANH constitutive model was conducted. Firstly, the secondary development subroutine of the TANH constitutive model is written by combining the traditional elastic-plastic theory, Newton's iterative method, and the damage evolution criterion based on equivalent plastic displacement and embedded into the two-dimensional orthogonal cutting finite element model. Then the material properties were defined using the J-C constitutive and self-programmed TANH constitutive models, respectively. The experimental data of cutting force and chip morphology were compared. The TANH constitutive model subroutine simulation results were more accurate than those using the J-C constitutive model. The average cutting force error was improved by 3.8 %. The error of chip serration degree was 17.4 %, indicating that the TANH constitutive model subroutine can better describe the material deformation behavior during cutting Ti6Al4V titanium alloy. In addition, the effects of TANH constitutive model parameters and damage evolution characteristics parameters on cutting simulation are also analyzed based on the constructed finite element model, which can provide a reference for improving the accuracy of metal cutting finite element simulation and exploring the mechanism of serrated chip formation.

Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior

Simulation of Chip Formation in High-Speed Hard Machining

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J–C Constitutive Relation Simulation Model

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Numerical investigation on serrated chip formation during high-speed milling of Ti-6Al-4V alloy

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

Prediction of critical cutting condition for onset of serrated chip in ductile metallic material using dynamic yield stress

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

Characterization of serrated chip formation based on in-situ imaging analysis in orthogonal cutting

Numerical Analysis of Serrated Chip Formation Mechanism with Johnson-Cook Parameters in Micro-Cutting of Ti6Al4V

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Understanding The Deformation Of Metals In High Speed Cutting

Large Chip Production Mechanism under the Extreme Load Cutting Conditions

Research on serrated chip morphology for turning Ti6Al4V titanium alloy by considering damage evolution

Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model

The advance of research on constitutive model used in finite element simulation of metal cutting