Abstract:The possibility of using lasers to achieve previously unobtainable states of matter in the laboratory gained much attention following the demonstration of the first pulsed laser in 1960. In the following few years there was plenty research activity as attempts were made to increase the peak power and focused intensity in order to reach extreme conditions within the laboratory. Laser-acceleration technology is rapidly developing. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (X rays, electrons, protons, neutrons and ions). As a new source of ionizing radiation, dose measurement in ultra-intense and ultra-short laser facilities is of great value for radiation protection of the environment, occupational staff and shielding design in laser device design stage. Owing to the pulsed and mixed characteristics of radiation field around the laser facility, it is really challenging to accurately measure the dose equivalent induced by bremsstrahlung photon in the target chamber of the laser facility. Moreover, the rationality of dose assessment model needs more experimental data and to be further verified. To reach this point, the Monte-Carlo program FLUKA was employed to characterize the radiation filed distribution. Firstly, a complete and thorough target chamber module was established according to the XG-Ⅲ geometry parameter and material composition. The in-chamber and out-chamber dose distribution were then calculated and analyzed based on the existing theoretical model of electron source term and typical experimental conditions. The electron energy distribution, characteristic electron temperature, scaling laws and laser-to-energy conversion efficiency were introduced. Secondly, the typical electron spectrum was divided into four intervals. The portion of different energy intervals to the total equivalent dose was determined. Thirdly, a bremsstrahlung photon dose equivalent measuring module was designed and optimized for ultra-intense and ultra-short laser facilities. The simulation results indicate that: 1) The electron dose equivalent is higher than the bremsstrahlung photons both inside and outside the target chamber; 2) The dose equivalent contribution of 0.15 MeV electron energy interval to the total energy range is dominant, and the module was design based on the conclusion; 3) The designed module mainly consists of PMMA and metallic shielding material. With this approach, the module can reduce the electron dose equivalent to 0.3% and photon dose equivalent to 69.1%. The dose ratio of electron to photon is about 128%. In addition, 5% of the total photon dose is contributed by the occurrence of bremsstrahlung of highenergy electron in PMMA.

Dose-depth Distribution During Sterilization with Electron Radiation

The Effect of Radiation on a Variety of Pharmaceuticals and Materials Containing Polymers

Research on Effect of Electron Radiation on Paper

Sterilization of medical waste by electron beam

Monte Carlo Simulations Demonstrating Physics of Equivalency of Gamma, Electronbeam, and X-ray for Radiation Sterilization

Dose Measurement Experiments for Single and Composite Targets in 6 Mev Linear Accelerators

The Structure and Properties of Medical Disposable Protective Clothing Materials with Different Packaging and Models under γ Irradiation

X-Ray and Proton Radiation Effects on 40 Nm CMOS Physically Unclonable Function Devices

Optimization of X-Ray Spectra in Medical Sterilization Accelerator through MCNP

Study on Photon Dose of Ultra-intense and Ultra-short Laser Facility Based on Fully Monte-Carlo Simulation

"Zero-field" dose data for 60Co and other high-energy photon beams in water

A deterministic partial differential equation model for dose calculation in electron radiotherapy

Preliminary Study for Dosimetric Characteristics of 3D-printed Materials with Megavoltage Photons

Study on Estimating the Dose for 6 MV X-ray Partial-Body Irradiation Using Contaminated Poisson Technique

Impact of Aluminum Plates on Uniformity of Depth Dose Distribution in Object during Electron Processing

Photon Dose Estimation from Ultraintense Laser–solid Interactions and Shielding Calculation with Monte Carlo Simulation

CALCULATION FOR THE RADIATION DOSE DISTRIBUTION AND THE IMPACT OF SCATTERER ON RADIATION DOSE IN A 60Co CONTAINER INSPECTION HALL USING MONTE CARLO METHOD

Effect of Diode-Based Transmission Detector Measurement on Dose Perturbation during Delivery of 6MV Photon

Dose mapping of the 60Co gamma irradiation facility and a real irradiated product – Measurements and Monte Carlo simulation

Monte Carlo Calculation of the Shielding of Mail Irradiation Systems

Experimental Research of Dose Distribution and Protection for Mobile Intra-Operative Radiotherapy Accelerator in Operating Room