Abstract:The possibility of using lasers to achieve previously unobtainable states of matter in the laboratory gained much attention following the demonstration of the first pulsed laser in 1960. In the following few years there was plenty research activity as attempts were made to increase the peak power and focused intensity in order to reach extreme conditions within the laboratory. Laser-acceleration technology is rapidly developing. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (X rays, electrons, protons, neutrons and ions). As a new source of ionizing radiation, dose measurement in ultra-intense and ultra-short laser facilities is of great value for radiation protection of the environment, occupational staff and shielding design in laser device design stage. Owing to the pulsed and mixed characteristics of radiation field around the laser facility, it is really challenging to accurately measure the dose equivalent induced by bremsstrahlung photon in the target chamber of the laser facility. Moreover, the rationality of dose assessment model needs more experimental data and to be further verified. To reach this point, the Monte-Carlo program FLUKA was employed to characterize the radiation filed distribution. Firstly, a complete and thorough target chamber module was established according to the XG-Ⅲ geometry parameter and material composition. The in-chamber and out-chamber dose distribution were then calculated and analyzed based on the existing theoretical model of electron source term and typical experimental conditions. The electron energy distribution, characteristic electron temperature, scaling laws and laser-to-energy conversion efficiency were introduced. Secondly, the typical electron spectrum was divided into four intervals. The portion of different energy intervals to the total equivalent dose was determined. Thirdly, a bremsstrahlung photon dose equivalent measuring module was designed and optimized for ultra-intense and ultra-short laser facilities. The simulation results indicate that: 1) The electron dose equivalent is higher than the bremsstrahlung photons both inside and outside the target chamber; 2) The dose equivalent contribution of 0.15 MeV electron energy interval to the total energy range is dominant, and the module was design based on the conclusion; 3) The designed module mainly consists of PMMA and metallic shielding material. With this approach, the module can reduce the electron dose equivalent to 0.3% and photon dose equivalent to 69.1%. The dose ratio of electron to photon is about 128%. In addition, 5% of the total photon dose is contributed by the occurrence of bremsstrahlung of highenergy electron in PMMA.

Photon Dose Estimation from Ultraintense Laser–solid Interactions and Shielding Calculation with Monte Carlo Simulation

Dose estimation and shielding calculation for X ray hazard at high intensity laser facilities

Shielding study of hard X-rays produced by high-intensity laser interaction with solid targets

Study on Photon Dose of Ultra-intense and Ultra-short Laser Facility Based on Fully Monte-Carlo Simulation

DOSIMETRIC EVALUATION OF LASER-DRIVEN X-RAY AND NEUTRON SOURCES UTILIZING XG-III PS LASER WITH PEAK POWER OF 300 TERAWATT

X ray Dose and Spectrum Measurement in Intense Laser irradiated Solid Target

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Preliminary Study on Hazard of Hard X-ray Radiation Produced in Interaction Between High Intensity Laser and Solid Target

Measurements of X-ray Doses and Spectra Produced by Picosecond Laser-Irradiated Solid Targets

Review of bremsstrahlung photon dose generated from ultra-intense and ultra-short laser target interactions

Effect of the oblique incidence of radiation beams on emerging radiation behind lead and concrete shields: a multilayer method for dose transmission calculations

Human radiological safety assessment for petawatt laser-driven ion acceleration experiments in CLAPA-T

Bremsstrahlung Dose Yield for High-Intensity Short-Pulse Laser-Solid Experiments

Radiation dose and shielding effects for space radiation

A Newly Developed and Verified Transport Capacity of Monte Carlo Photon Particles in RMC

Calculation of photoneutrons produced in the targets of electron linear accelerators for radiography and radiotherapy applications

Simulation Of Hard X-Rays Source Produced By A Picosecond Laser Irradiated Solid Target For Compton Radiography

Monte Carlo Calculation of Induced Radioactivity for a 15-MV Electron Accelerator Head Structure

Monte Carlo simulation and optimization of neutron ray shielding performance of related materials

Characteristics of X/γ-ray Radiations by Intense Laser Interactions with High-Z Solids: the Role of Bremsstrahlung and Radiation Reactions

Proton Beams from Intense Laser-Solid Interaction: Effects of the Target Materials