Abstract:<p>Different from traditional ceramic materials, three-dimensional (3D) porous ceramics have become a research hotspot in recent years due to combinative of light-weight and high strength. Meanwhile, the 3D printing technique, which can be used to design hierarchical porous structures by combining flexible design and advanced manufacturing procedures, is regarded as a revolutionary and attractive tool for the preparation of 3D porous ceramics. Herein, a novel road is reported for fabricating 3D porous ceramic lattices with excellent mechanical properties by bridging 3D printing and SiC chemical vapor infiltration. The effects of coordination number, rotation angle, hollow structure and sintering temperature on the performance of ceramic lattices were also investigated. As revealed by the results, the cubic lattices possess the highest compressive strength and fracture work, 41.93 MPa and 2126.7 kJ/m<sup>2</sup>, respectively. Among different hollow lattices, the stability and bearing capacity of triangular structures were superior to that of square and honeycomb structures. The compressive strength of the triangular hollow lattices can reach up to 31.20 MPa. And the fracture work of the 3D porous lattices without rotation can be 7 times that of the lattices with a rotation angle of 30° and 45°. Moreover, as the sintering temperature rises, the compressive strength of 3D porous ceramics gradually increases while the shrinkage tends to be more serious. Additionally, the fracture work of 3D porous ceramics reaches its peak at a sintering temperature of 1400 °C. The approach developed in this work provides a simple, economic, and effective way to fabricate 3D porous ceramics, which leads to promising applications in future functional devices.</p>

Microstructure and mechanical performance of porous cordierite ceramic parts manufactured by selective laser sintering

Fabrication and Characterization of Porous Cordierite Ceramics Prepared from Fly Ash and Natural Minerals

In-situ synthesis and properties of porous cordierite ceramics with adjustable pore structure

Fabrication and Properties of Porous Sic-Cordierite Ceramics

Mechanical and microstructural properties of cordierite-bonded porous SiC ceramics processed by infiltration technique using various pore formers

Microstructure and properties of porous Si 3 N 4 ceramics fabricated by digital light processing combined with spark plasma sintering

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Structure design influencing the mechanical performance of 3D printing porous ceramics

Microstructure Evolution and Mechanical Properties of Ceramic Shell Moulds for Investment Casting of Turbine Blades by Selective Laser Sintering

Near Net Size Sintering of Porous Cordierite Ceramics with Excellent Properties

Sintering behaviors and properties of porous ceramics derived from artificially cultured diatom frustules

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

Synthesis of Porous Cordierite Using Rice Husk As Silica Source and Pore Forming Agent

Influence of Titanium Dioxide on the Microstructure and Properties of Porous Cordierite Ceramics

Microstructure and properties of highly porous Y2SiO5 ceramics produced by a new water-based freeze casting

Uniting printability and self-supportability of cordierite precursor pastes for fabricating cordierite ceramics with custom structures via supportless stereolithography

Sintering behavior and mechanical properties of sintered ceramics based on spodumene tailings

Preparation And Properties Of High Strength Porous Si3n4 Ceramics

Aluminum titanate based composite porous ceramics with both high porosity and mechanical strength prepared by a special two-step sintering method

Effects of raw material ratio and post-treatment on properties of soda lime glass-ceramics fabricated by selective laser sintering

Selective laser sintering of porous Al2O3-based ceramics using both Al2O3 and SiO2 poly-hollow microspheres as raw materials