Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

Modeling of metallic shear failure by void-based meso-damage model

Analysis of Metallic Ductile Fracture by extended Gurson models

Microvoid Multistage Nucleating Model and Its Application in Analyses of Micro Damage and Fracture

Extended GTN Model for Predicting Ductile Fracture under a Broad Range of Stress States

DUCTILE DAMAGE ANALYSIS FOR FRACTURE IN SHEET METAL FORMING BASED ON GTN MESOSCOPIC DAMAGE MODEL

Modified Gtn Model for A Broad Range of Stress States and Application to Ductile Fracture

A coupled ductile damage model for metal matrix composites: Development and application

A Shear Modified GTN Model Based on Stress Degradation Method for Predicting Ductile Fracture

A Generalized Ductile Phase Field Model for Fracture Behavior of Three-Dimensional Metal Structures

Anisotropic Gurson-Tvergaard-Needleman model considering the anisotropic void behaviors

A New Ductile Damage Model Based on Void Growth

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Micromorphic Constitutive Equations with Damage Applied to Metal Forming

Size Effect on the Damage Evolution of a Modified GTN Model under High/low Stress Triaxiality in Meso-Scaled Plastic Deformation

A STUDY ON EXPERIMENTS AND SIMULATIONS FOR DUCTILE FRACTURE OF ISOTROPIC MATERIAL USING ROUSSELIER'S DAMAGE MODEL

Numerical Simulation and Defect Prediction of Forming Process for Aluminum Alloy Sheets Considering the Effect of Both Anisotropy and Lode Parameter

Research on Sheet Metal Semicutting Process Using Coupled and Uncoupled Damage Model

Numerical simulation of incremental sheet forming based on GTN damage model

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Applicability of shear modified GTN model under variable path loading with tension and shearing

Modeling of the ductile damage – Application for bar shearing