Analysis of Metallic Ductile Fracture by extended Gurson models

Wei Jiang,Yazhi Li,Yixiu Shu

2013-01-01

Abstract:Ductile fracture of metallic materials is usually the result of void nucleation, growth and coalescence. The original Gurson-Tvergaard (GT) model deals with the homogenous deformation related to void nucleation and growth. However, it takes no consideration on the localized deformation due to the void coalescence. In this paper extended GT damage models incorporating two different void coalescence criteria are developed, respectively. One of the void coalescence criteria is based on the plastic limit load model by Thomason; the other decides the onset of void coalescence by a critical equivalent plastic strain as a power law of stress triaxiality (defined by the ratio of the hydrostatic stress over the equivalent stress). Hence, void coalescence is controlled by physical mechanisms, rather than by a critical void volume fraction which cannot be taken as a constant. The extended constitutive models are implemented into an implicit finite element code via a user defined material subroutine (UMAT) in ABAQUS. Detail analyses are performed for a series of notched round tensile bars. The predictions of the fracture behavior based on the proposed approach, from void nucleation to final material failure, are compared with experiment data. Both results agree pretty well. In the end, the effects of stress triaxiality are discussed.