Verification of a cohesive model‐based extended finite element method for ductile crack propagation

Huan Li,Lei Li,Jiangkun Fan,Zhufeng Yue

DOI: https://doi.org/10.1111/ffe.13392

2020-12-02

Abstract:<p>In this study, an approach utilizing a conjunction of the extended finite element method (XFEM) and the Gurson‐Tvergaard‐Needleman (GTN) micromechanical damage model is proposed for predicting the ductile crack propagation of a mill‐annealed Ti‐6Al‐4V alloy. The cohesive model‐based XFEM approach is used to capture the continuous crack propagation process, and the GTN model is applied to describe the constitutive behaviour of the material. Simulations are conducted by using the standard finite element code ABAQUS following a Newton–Raphson algorithm solution with employing the user material subroutine of the GTN model. In comparison with the experimentalresults of the smooth, notched and cracked titanium specimens, this approach is shown to be an efficient method for simulating the ductile crack propagation process under different stress triaxialities.</p>

materials science, multidisciplinary,engineering, mechanical

What problem does this paper attempt to address?

### Problems the Paper Aims to Solve

The main objective of this paper is to validate the effectiveness of the extended finite element method (XFEM) based on a cohesive model combined with the Gurson-Tvergaard-Needleman (GTN) micromechanical damage model in simulating the ductile crack propagation process in titanium alloys. Specifically:

1. **Materials and Models**:
- The study employs a method combining the extended finite element method (XFEM) and the GTN micromechanical damage model to predict the ductile crack propagation of annealed Ti-6Al-4V alloy.
- The cohesive model-based XFEM is used to capture the continuous crack propagation process, while the GTN model is used to describe the material's constitutive behavior.

2. **Simulation and Experimental Comparison**:
- Simulations are conducted using the standard finite element code ABAQUS, solved via the Newton-Raphson algorithm, and utilizing a user material subroutine for the GTN model.
- The method's effectiveness under different stress triaxialities is validated by comparing the simulation results with experimental data from smooth, notched, and cracked titanium alloy specimens.

3. **Study Subjects and Simulation Settings**:
- The study uses three types of specimens with different stress triaxialities: smooth round bars, flat specimens with holes, and three-point bending specimens.
- The geometric dimensions and boundary conditions of each specimen are described in detail, and the simulation results are compared and analyzed against experimental data.

4. **Model Parameter Calibration and Validation**:
- A series of calculations are performed to determine the parameters of the cohesive model-based XFEM and the GTN model, and the applicability of these parameters to different specimens is validated.
- Simulation results indicate that the proposed combined method can reasonably describe the ductile fracture process of smooth round bars and can be further applied to other specimens with different stress triaxialities.

In summary, this paper aims to validate the effectiveness and accuracy of the combined method of the cohesive model-based XFEM and the GTN model in simulating the ductile crack propagation process in metallic materials.