Abstract:To understand comprehensively the relationship between material ductility and stress state, the new shear, shear-compression, and shear-tension specimens were specially designed, and seven types of specimens were used in total to achieve precise control of stress states over wide ranges of stress triaxialities and Lode angle parameters. A hybrid experimental-numerical method was employed to determine the equivalent plastic strain, stress triaxiality, and Lode angle parameter, and hence to construct the 3D fracture locus of the Ti-6Al-4V alloy. Different micromechanisms were found to dominate the failure process under various stress states. Based on the experimental results, a new ductile fracture model coupling both stress triaxiality and Lode angle parameter was proposed and implemented into the commercial finite element program ABAQUS/Explicit via the user material subroutine VUMAT. Comparative studies with some other fracture criteria indicate that the proposed fracture model can capture the non-monotonic feature of fracture strain, and predict the fracture strain with better ac-curacy in a wide range of stress states. A verification test was performed to check the predictive capability of the present model. The results show the excellent agreement between experiment and simulation with respect to the fracture displacement and fracture morphology. This study paves the way for characterizing and predicting the ductile behavior of metallic materials under complex stress states, and provides a fundamental databank for the analysis and design of Ti-6Al-4V alloy structures.

Study on tensile fracture of pure copper plate with a center hole

Experimental study on large strain failure of T2-copper plate shear specimens

The Meso-inhomogeneous Deformation of Pure Copper under Tension–Compression Cyclic Strain Loading

Experimental Study on Deformation Evolution and Fracture Behaviors of Pure Titanium at Different Stress Triaxialities

On the Study of Stress-Strain of Thin-Walled Cylinder Tensile Specimens at High Temperature

Effect of Crystalline Anisotropy and Forming Conditions on Thinning and Rupturing in Deep Drawing of Copper Single Crystal

Relationship of Fracture Behavior and Stress Triaxiality of Additive Manufactured Ti-6Al-4V

Micro-structural Evolution Subjected to Combined Tension–torsion Deformation for Pure Copper

Influence of Deformation Stress Triaxiality on Microstructure and Microhardness of Pure Copper Processed by Simultaneous Torsion and Tension

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

Electron Backscatter Diffraction Analysis of the Microstructure Fineness in Pure Copper under Torsional Deformation

Simulation on Tensile Mechanical Properties of Single Crystal Copper Nanostructures with Different Holes Configurations

A Ductile Fracture Model Incorporating Stress State Effect

The Significant Size Effect on Nucleation and Propagation of Crack During Tensile Deformation of Copper Foil: Free Surface Roughening and Crystallography Study

Microstructure evolution, hardening and thermal behavior of commercially pure copper subjected to torsion deformation

On the fracture process of intermediate temperature embrittlement of pure copper in electrical-assisted tension

Thermo-viscoplastic Behavior and Constitutive Modeling of Pure Copper under High-Strain-rate Shear Condition

Fem Analysis on A Tensile Loaded Copper Plate in Meso and Macro Scale

Experimental study of microhole growth and coalescence in ductile materials

Size Effect on Deformation Behavior and Ductile Fracture in Microforming of Pure Copper Sheets Considering Free Surface Roughening

A molecular dynamics simulation of single crystalline copper nano-plate under uniaxial tensile/compressive loading